Solved: ISA550W SSHv2 login problem. (from LAN&WAN via TeraTerm)

DavidLi049 · ‎05-15-2014

Dear Support,

I want to use CLI to manage my ISA550W.

Since this model doesn't support Telnet. (Please correct me if I'm wrong)

Thus I try to use SSHv2 to access to ISA550W.

But it's doesn't works, I always got error message "Access denied".

My configuration is below:

Login username/password: admin/Aa123456

Device Management > Cisco Services & Support > Remote Support > Select SSHv2 Server "On" > Enter Remote Support Password "Aa123456"

I tried login username/password or empty username/Remote Support Password to access to ISA550W via SSHv2. But not works at all.

Is there another "root account" for SSHv2 purpose?

Any advice will be appreciated.

Thanks

David

chrebert · ‎05-15-2014

Hello David,

The ISA is not designed to be configured through CLI, but rather through the web GUI. It doesn't support SSH or telnet access for configuration.

You have found the diagnostic option for root SSH access, but that is something that level 2 or the engineering team would do with you if they were trying to isolate a bug or working a support case. For normal operation that is not accessible so you can go ahead and disable it unless requested by a support engineer.

Thank you for choosing Cisco,

Christopher Ebert - Advanced Network Support Engineer

Cisco Small Business Support Center

View solution in original post