07-15-2011 05:32 PM
I am running firmware 1.0.2.1 on my RV220W. I'd like to enable the UPnP service for automatic opening of ports as needed. According to the Admin guide the UPnP service can be enabled from the Firewall > Basic Settings > UPnP page, but I don't seem to have that page. What am I missing?
Solved! Go to Solution.
07-15-2011 06:19 PM
Try Administration > Discovery Settings > Discovery - UPnP
___________
Regards Simon
http://www.linksysinfo.org
NAS: TS-459 Pro F/W: 3.5.0 Build0623T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.2.1 Dev, TwonkyMedia 6.0.34 QPKG - Zenphoto 1.4.1.1 [7713] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.2.3, Cisco SLM2008, Dlink DSM-520, Xbox360
07-15-2011 06:19 PM
Try Administration > Discovery Settings > Discovery - UPnP
___________
Regards Simon
http://www.linksysinfo.org
NAS: TS-459 Pro F/W: 3.5.0 Build0623T - 4 x 1TB Samsung HD103SJ : EXT4 - APC ES 700VA UPS
QPKG: WordPress 3.2.1 Dev, TwonkyMedia 6.0.34 QPKG - Zenphoto 1.4.1.1 [7713] - phpMyAdmin v3.3.10
Network: Netgear DG834G V4.01.40 - DGTeam Rev. 0849 -> Cisco RV220W 1.0.2.3, Cisco SLM2008, Dlink DSM-520, Xbox360
07-15-2011 08:51 PM
Thank you! And duh...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide