12-06-2010 08:26 AM
Installed a RV016 for a client to be able to remotely connect and troubleshoot devices as needed.
Small network with a simple 192.168.1.x subnet.
Setup the QuickVPN, and can connect to it just fine, I just can't connect to any of the devices on the 192 network. This is all Audio/Video gear that uses specific ports to reach their admin tools, but I can't even ping the devices.
No IP conflicts as I'm on a 172. No firewalls installed.
Any suggestions?
Thanks for any/all help.
12-06-2010 01:14 PM
Hi Rob,
Have you tried putting a laptop or other PC on the internal 192 network and enabling RDP access and then try that?
Just want to make sure that NAT is functioning correctly to get to the internal devices.
I would start with that to verify this is not a network issue first.
Dave
12-07-2010 07:24 AM
Dave,
Thanks for the reply, and yes, if I'm on the NAT side of things (192), I can connect and do everything I need with the devices. I just can't hit them when connected over the VPN.
I've got a RV042 here at the office and am going to try and recreate. Maybe I'm just missing a step.
12-07-2010 08:55 AM
Hi Rob,
Thanks for the update. Please keep us informed if you can re-create.
Dave
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide