I am currently working with a pharmacy in Ashern that has been selected to be a part of the testing phase of the new Pharmacare network in Manitoba. The desired setup is as follows:
Business Level MTS DSL provides internet connectivity for the pharmacy including debit machines
Separate Business MTS DSL connection provides a secure VPN connection between the pharmacy and the Pharmacare servers that is only ever used when Pharmacare claims are submitted.
3 computers connected to the LAN that need to be able to use the VPN connection to submit Pharmacare claims electronically for their clients
I was trying to make it work using the following setup
WAN 1 -> MTS DSL the provides internet
WAN 2 -> MTS DSL that provides VPN to Pharmacare network
LAN 1 -> Main pharmacy computer
LAN 2 -> Switch that connects to the rest of the LAN network
Route to the Pharmacare network going out WAN2
Default route going out WAN1
The issue I had with this setup is that it seemed like I could only get one WAN or the other, never both. I've come to realize that it is supposed to be like that. I have also tried changing the RV042 to router mode and connecting it to a home DLink router but that didn't work either and makes sense that it wouldn't. My quesion to you is what is the best way to achieve the needed setup? I only have 1 public ip available to me on the Pharmacare network so I'm not sure what the solution is. I've attached a network diagram to help clarify the issue.
Thanks for any help you provide.