06-03-2013 03:05 AM
Bonjour,
Tous les vendredi soir 23h, la communication internet est interrompue. Un reboot du routeur est obligatoire pour récupérer la connexion:
Comment automatiser un reboot sur un RV042...
Y a t-il une programmation automatique pour l'heure et le jour en question.
Les deux modems reliés sont sur onduleur et ne semble pas être programmé pour rebooter à l'heure dite.
On dirait que les modems et le routeur s'arretent et reboot en même temps, et alors le routeur ne prend que l'adresse fixe des modems pas l'adresse attribuée par dhcp.
Dans le log, a 23 h le 24, le 17, le 10 mai etc... la ligne wan connection is up est présente..
Une piste à explorer: le router et un modem marque une heure et une date 1 jan 2010 00h
Merci pour vos conseils
Traduction automatique
Hello,
Every Friday evening 23h, internet communication is interrupted. A reboot of the router is required to retrieve the connection:
How to automate a reboot on a RV042 ...
Is there a program for automatic time and date in question.
Both modems are connected to the inverter and does not seem to be programmed to reboot at the specified time.
Looks like the modem and the router reboot and stop at the same time, and then the router takes the fixed address modems not address assigned by DHCP.
In the log, a 23 h 24, 17, May 10, etc ... line wan connection is up is this ..
Worth exploring: the router and modem marks a time and date 1 January 2010 00h
Thank you for your adviceHello,
Every Friday evening 23h, internet communication is interrupted. A reboot of the router is required to retrieve the connection:
How to automate a reboot on a RV042 ...
Is there a program for automatic time and date in question.
Both modems are connected to the inverter and does not seem to be programmed to reboot at the specified time.
Looks like the modem and the router reboot and stop at the same time, and then the router takes the fixed address modems not address assigned by DHCP.
In the log, a 23 h 24, 17, May 10, etc ... line wan connection is up is this ..
Worth exploring: the router and modem marks a time and date 1 January 2010 00h
Thank you for your advice
06-11-2013 01:52 PM
Hi Claude, thank you for using our forum, my name is Luis I am part of the Small business Support community. I think this kind of issues could be related to the time zone, you could go to Setup > Time and configure your time.
I hope you find this answer useful
Greetings,
Luis Arias.
Cisco Network Support Engineer.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide