04-09-2012 08:53 PM
Dear All:
I wanna block the Lan IP address(eg:192.168.2.106) to visit wan web, and allow it to lan.How can i set it in access rules?
Thank u all.
snap as following:
04-10-2012 12:14 PM
Hello Decem_Lau
You will want to create the following rules-
Priority 1
Allow
All Service
Source Interface: LAN
Source IP: Single 192.168.2.106
Destination IP: Range 192.168.2.1 - 192.168.2.255
Priority 2
Deny
All Service
Source Interface: LAN
Source IP: Single 192.168.2.106
Destination IP: Any
This will stop the IP from getting to anywhere by the local network.
04-10-2012 08:59 PM
Thank you,Robert.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide