10-24-2012 07:26 AM
1) SG200-18 configuration
- VLAN 10 and 20
- VLAN 10: Port 1 tagged, Port 14 untagged
- VLAN 20: Port 1 tagged, Port 13 untagged
- Port 1: 1UP, 10T, 20T Admit tagged PVID 1
- Port 14: 10UP Admit untagged PVID 10
- Port 13: 20UP Admit untagged PVID 20
Port 1 connected to Fiber ONT (On VLAN 10), Port 14 connected to RV042G WAN.
Once RV042G LAN connects to SG200-18 (VLAN 1) port, RV042G WAN unable to get public IP and internet connection gone, port 14 showing "Discarding" under "Spanning Tree"
Can anyone help?
Solved! Go to Solution.
10-29-2012 09:32 AM
Is the protocol binding works on RV042G? The "Help" says only RV016.
10-29-2012 12:35 PM
Hi Lian, as I specified in my very first post and preceeding posts, 802.1q permits only one spanning-tree instance. It is why disabling spanning-tree works.
Yes, protocol binding does work for all of the RV0XX models.
-Tom
Please rate helpful posts
10-29-2012 09:39 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide