Static routing: 192.168.1.239 to 172.25.152.64/224
The unit is configured as internet gateway. 4 NAT ports are active.
When firewall disabled all works fine.
When firewall enabled I do get connection lost at random interval.
In firewall only 4 rules added to the default 3 rules. The added rules are:
1/ permit 192.168.1.22 port 25 to any
2/ permit 192.168.1.27 port 25 to any
3/ permit 192.168.1.10 port 25 to any
4/ deny any port 25 to any
I do get at random times connection lost when navigating with windows explorer on a PC with IP 192.168.1.x to a share on a PC with IP 172.25.152.74. The same happens when copying files. Sometimes it works, later it fails or reties are needed. When the firewall is switched off all runs fine.
Ping from 192.168.1.x to 172.25.152.74 allways give a <1ms response
Is there a RV082 perfomance problem or do I have a configuration problem?
Sorry if my reply is Off Topic w.r.t. your question (and this does not try to be a thread hijacking) but I have a question for you.
I've the same RV082 but v2 and when I disable firewall, Remote management is Enabled.
This seems to be by design, it is written also in the manual.
So when I disable firewall (and I need it to be disabled, since it is done better elsewhere), on a public ip is exposed the authentication form to administer the router, on port 80 and 8080. Which is a big and obvious security risk.
Is the same also for RV082 v3?
I've posted a question here in the forum, but yet without answers