04-15-2015 11:33 PM
RV130 very high CPU usage when QoS enabled
Should QoS consume so much CPU power?
04-15-2015 11:37 PM
My config
WAN : GigaLAN to 300M fiber modem
LAN: 3x 100M LAN to 3 access points
QoS setting : Port based, 3 APs are set to high, mid, low priority
Test executed:
recursive shell script wget -q -O /dev/null ftp://download.my.isp.test.server/BIGFILE.zip
Result
QoS | CPU load | Total downstream | Other problem |
Enable | > 85% | < 130Mbps | Slow GUI Sometimes PPTP drops |
Disable | 7% to 9% | up to 185Mbps |
|
05-15-2016 08:09 AM
Hi,
I have the same issue using the last firmware (1.0.3.14). What are the procedure to disable QoS?
Thks!
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: