RV325 > RV325 Gateway to Gateway VPN Routing

[Jeanas]

Hello.

I have two RV325 connected over Gateway to Gateway VPN on WAN2 (Connected between two building WiFi 5GHz) to connect LAN A and LAN B. Every router use his WAN1 to connect to Internet. I can not set optional routing (or backup routing) over the VPN to use WAN1 of second router  to connect to Internet.

Router A. RV325

WAN1 - Public IP 1

WAN2 - Local IP 1

LAN A

Router B. RV325

WAN1 - Public IP 2

WAN2 - Local IP 2

LAN B

I can not add at routing table na router A:  0.0.0.0      0.0.0.0     "LAN B gateway"   

Can anybody help me? Peter.

[Eric Moyers]

My name Eric Moyers. I am an Engineer in the Small Business Support Center.

I am sorry to hear that you are experiencing this issue. Here is a link to a Cisco knowledge base that should be very helpful to you. 

Gateway to Gateway Virtual Private Network (VPN) Configuration on RV320 and RV325 VPN Router Series

http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=00645babb1594fa09183f20ad79c2f40_Gateway_to_Gateway_VPN__Virtual_Private_Network__Configurati.xml&pid=2&respid=0&snid=4&dispid=0&cpage=search

Eric Moyers
.:|:.:|:. CISCO | Cisco Presales Technical Support | Wireless Subject Matter Expert

Please rate helpful Posts and Let others know when your Question has been answered.