RV325 router firewall access rules have not effect on network traffic

[kodosarudon]

I have tried to restrict network access with single destination IP deny rules that have no effect on traffic. I have a RV325 with the latest firmware 

Firmware Version:

v1.2.1.13 (2015-05-04, 18:40:51)

Even when I added deny all rule #1 (see attached file), nothing is effected. Am I doing something wrong or is this something wrong with the router? I have work for years with other firewall tables and my RVS4000 worked the way I expected until I replaced it with this.

Access Rules Table

Items 1-5 of 8 5102550per page

	Priority	Enable	Action	Service	Source Interface	Source	Destination	Time	Day
	1		Deny	All Traffic [1]	*	Any	Any	Always
			Allow	All Traffic [1]	LAN	192.168.3.1/255.255.255.0	Any	Always
			Allow	All Traffic [1]	LAN	192.168.2.1/255.255.255.0	Any	Always
			Allow	All Traffic [1]	LAN	192.168.4.1/255.255.255.0	Any	Always
			Deny	All Traffic [1]	USB1	Any	Any	Always

[dancrichton]

I've just tried this on my RV320 running v1.2.1.13 and it appears to have worked OK, I couldn't connect to anything outside of my test LAN and the RV320 logs showing all the traffic being blocked.

Dan

[D_A_N_I_E_L_74]

Same router, same firmware and ... same bug!