RV340 - AnyConnect port

[Viktor Jahna]

Is it possible change default port 8443 to 443? SSL VPN does not make sense for us, if does not use standard port.

When I change port to 443 AnyConnect throw error about communication errors with server. 

[Christian Woegerbauer]

Hello!

Same problem for me. I also tried to change the default management port to TCP 8443 under "Firewall - Basic Settings - Remote Web Management". Still getting the error "This port is used by Remote Web Management / LAN/VPN Web Management" when I try to set the SSL-VPN Port to TCP443.

Regards,
Woger

[Mark30]

Same problem for me. I also tried to change the default management port to any other TCP port under "Firewall - Basic Settings - Remote Web Management". Still getting the error "This port is used by Remote Web Management / LAN/VPN Web Management" when I try to set the SSL-VPN Port to TCP443.

It doesn't feel right to configure SSL to use the wrong port as this will just make it more difficult to connect via VPN.

Looks like a bug in the RV340W firmware.

[Christian Woegerbauer]

Hello!

Meanwhile the bug seems to be fixed. SSL-VPN via TCP443 works now, tested it with release 1.0.03.16.

The only thing to do is change all Ports under Firewall-Basic Settings to other than 443.

Then you can change the SSLVPN-Port to 443.

Best Regards,

Woger