rv34x configure broadcast for printer from one VLAN to another

[bigcat88]

Router model RV345P with last firmware.

For example has 2 networks VLAN1 and VLAN2.

Printer lives in VLAN2 network.

It must be discoverable not only throw direct IP.

Is it possible?

P.S.: Inter-VLAN enabled, I can ping it, port on printer is reachable. But I don't know where to enable broadcast between VLANs(better to allow to broadcast only for printer)

Thanks.

[balaji.bandi · Accepted solution]

ip direct-brodcast should be the command to pass over other VLAN, But Most of the RV has Limited command functionality.

broadcasts can be controlled using firewall ACL, but i have never done it. try that option.