cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2135
Views
0
Helpful
2
Replies

RVS4000 firmware upgrade to ver 2.0.3.2

curtisbushnell
Level 1
Level 1

         Hello,

I have firmware version 2.0.2.7. I've down loaded the firmware upgrade utility ver 1.3, and do not see a read me or help file.  I've disconnected the cables as directed, but recive a 'broadcast error' and a 'browse device error'      What is causing this?

Curtis

1 Accepted Solution

Accepted Solutions

Tom Watts
VIP Alumni
VIP Alumni

Hi Curtis, the firmware upgrade should be done through the GUI of the RVS4000. If you're able to log in to the device, the upgrade is under admin -> firmware upgrade, then just browse the file and upload it.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

View solution in original post

2 Replies 2

Tom Watts
VIP Alumni
VIP Alumni

Hi Curtis, the firmware upgrade should be done through the GUI of the RVS4000. If you're able to log in to the device, the upgrade is under admin -> firmware upgrade, then just browse the file and upload it.

-Tom
Please mark answered for helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

curtisbushnell
Level 1
Level 1

That did it!!!

Do not understand why the prevoius posts had  recommended using the firmware upgarde utility.

Curtis

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: