cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1409
Views
0
Helpful
2
Replies

SRP527W with Split Tunnel

Bryce Ryan
Level 1
Level 1

Hi Guys,

I've just deployed a SRP527W that I've had lying around for a while.

Everything on the unit runs as well as can be expected, however I have a requirement to run split tunneling for VPN users.

Currently the only route that the VPN client receives is a default route. I noticed that on site to site VPN's and GRE tunnels you can specify secured routes, however I can't find anything that relates to the VPN remote users. This can be done on IOS without a problem but would be nice for the SRP.

I'm running the latest firmware 1.01.26, so if I haven't overlooked something would this be likely for a future release?

Cheers.

Bryce

1 Accepted Solution

Accepted Solutions

Andrew Hickman
Cisco Employee
Cisco Employee

Hi Bryce,

Nothing overlooked, it is not possible to configure split tunnelling for the SRP VPN server.

Regards,

Andy

View solution in original post

2 Replies 2

Andrew Hickman
Cisco Employee
Cisco Employee

Hi Bryce,

Nothing overlooked, it is not possible to configure split tunnelling for the SRP VPN server.

Regards,

Andy

Hi Andy,

No problems, thanks for your answer.

Hopefully this will pushed as feature to newer firmware.

Cheers.

Bryce