cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
706
Views
0
Helpful
1
Replies

VLAN to Different WAN - RV320

gilespapworth
Level 1
Level 1

Hi Everyone,

This may be a silly question and it may not be.

A situation has arrived where by I will need two connections for two different subnets (on a temporary basis).

I have a sg300 switch handling VLANS and a RV320 handling the routing for internet traffic, that all works fine.

On a temporary basis i would need to send traffic from one subnet through one connection and traffic from another subnet through another. Is this achievable on the RV320 and if so where would I look at configuring that.

My initial thought is at the firewall by denying certain subnet traffic through to a specific IP range and vice versa.

Thanks for any help

1 Reply 1

Luis Gradyz
Cisco Employee
Cisco Employee

Hello