Hi How to confirm if SFP is single mode? i have SFP on which shows GLC-SX-MM. Is this multi mode because it shows MM. Thank you
Hi How to confirm if SFP is single mode? i have SFP on which shows GLC-SX-MM. Is this multi mode because it shows MM. Thank you
hello allsorry my question i've tried not to ask duplicate question but as i have seen in most forums and websites definition of RD (route distinguisher ) and route-target is defined but cause little bit confusing i dig into deeper and maybe i figure...
This topic is a chance to discuss more about how you can utilize the Cisco SD-WAN Cloud onRamp for CoLocation solution to conquer your cloud initiatives without having to sacrifice security, optimization, latency, and flexibility. Cisco SD-WAN Cloud ...
Hi All, I would like to build point to multi-point L2TPv3 pseudo-wire tunnel across WAN. I have read documents that it works only P2P however is there a way to achieve the same as it will traverse across the GRE tunnels or can we build two separate ...
Can apply config two active cellular interface with only one controller ? Because I would like apply to the ISR4000 to use with 2sims
Hi, C4507R-E-II#sh logg | i 10.10.101.1Jul 22 13:52:20: %IP-4-DUPADDR: Duplicate address 10.10.101.1 on Vlan70, sourced by 0007.b400.4602Jul 22 14:03:20: %IP-4-DUPADDR: Duplicate address 10.10.101.1 on Vlan70, sourced by 0007.b400.4602Jul 22 14:18:0...
have an RV130W router, about 2.5 years old, last firmware update. The main internet signal is passed through from my cable modem that is setup as passthrough. Multiple times a day, I will hit various web pages and the page will tell me there is eith...
Hi there,Can someone explain the difference between the following commands:1. ip route 10.0.0.0/24 10.1.1.1 vrf TEST-vrf12. vrf context TEST-vrf1ip route 10.0.0.0/24 10.1.1.1Thanks.Frank
Hello, I need help with Catalyst configuration.I am creating a separate VLAN in Cisco Catalyst for our guest so his access is limited to the Internet only and he won't be able to access our internal network. Internal LAN: 10.1.1.0/24Guest LAN: 10.1.1...
Hi all, I have CISCO EPC3928AD and i have static IP address and i cant forward more than one local IP.I was looking for a firmware for this model and i cant find it nowhere.Can you guys help me find the latest firmware for CISCO EPC3928AD and also th...
Hello Community, I am using an IR809 router. I could establish GE0 connection successfully. But GE2 I intended for accessing IOx manager is not working out. It should give me the manager at port 8443 of my GE2 IOx host IP 192.168.1.3, but it is not.i...
Hi,I have an ASA2110 for multiple VPN customer's which are accessing different servers in our cloud environment.I will make this as simple as I can, my scenario is like this: 1 - On the ASA there is a DMZ sub-interface configured on 192.168.56.0/24 s...
Hi,I have seen static route pointing towards a null0 interface in BGP. Can I know why it is used for?
I am setting up QoS for the first time, to accomodate requirements from a specialized VoIP vendor, and testing on GNS3 with Viral IOSv images, and am running into two issues. A pair of routers on each end communicate over a tunnel (on a semi-private...
Hi All and thanks for any clues or solutions. First Issue My VPN setup seems to work ( Connects fine to my Iphone and Ipad) even with some issues in the log !! ?? Should I just ignore those ?? %CRYPTO-6-IKMP_MODE_FAILURE: Processing of Aggressive mo...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
| Subject | Author | Posted |
|---|---|---|
| 03-03-2026 03:16 AM | ||
| 03-01-2026 07:34 PM | ||
| 02-19-2026 05:51 AM | ||
| 02-17-2026 02:51 AM | ||
| 02-04-2026 09:44 PM |