Routing and SD-WAN

Hi. I have been trying to find out what will be the DNS Server configuration on a vEdge Router with two transport networks; mpls and internet. Logically, both the links will be connected in vpn0 and the vEdge will point to the vBond FQDN as per best ...

Hey everybody,   Here at our site we rely on multicast to push IPTV out to our users from a IPTV Set Top Box.   In the HQ building we have a 6507 with SVIs configured. Pim sparse mode on these SVIs. We use a Static RP. Everyone coming off of an SVI h...

Hello, I bought a "Cisco 891 Integrated Services Router" and want to update the  soft/firm ware. (when connecting to it it wants to use Java, and those browser plugins are "obsolete". Where can I find  the software/firmware for updating that router? ...

Hi, I have 2 routers connected to two ISPs as below: R1 --------- ISP1 | -------- Firewall ---- | Switch | -------- | R2 --------- ISP2   * I permit only default route from ISPs. * I have also 2 Subnets (/24). * Both Subnets advertised to both ISPs. ...

RV320 Only one port is forwarding. Port 3001 forwards to IP 192.168.0.101 perfectly. But Port 3004 will not forward to  IP 192.168.0.104. I have tried everything, but still does not forward.

continue to receive the below warning in logs,Attached the log .jpg here.Can anyone help me to clarify the issues? Thank you very much.

recently i added a new ISR4221 router in my environment as C1941 router is EOL.seems like ISR router have different commands as i cannot enable netflow as i previously do in C1941.eg. i cannot do ip flow-top-talkers to see who is hogging my bandwidth...

I am in Cisco 887Va-k9  hell insofar as my Sonic connection goes.  There is some network connectivity - I can connect to Cisco at 10.10.10.0 and get their tech support configuration file but no internet.  Sonic sees the connection and verifies the st...

I have a route in my BGP table that's being suppressed that I can't seem to un-suppress. I believe I'm missing something simple but I can't seem to put my finger on it. I have an aggregate for 10.0.0.0 255.0.0.0 but I'm trying to un-suppress the 10.1...

Hi All,As I'm doing an EIGRP lab, I noticed a strange behavior with the 'variance' command. Its very possible that I'm missing something, which is why I wanted to ask here so if someone can point out the cause of this behavior or if otherwise the doc...

I am in need of the heat output of the 4431 router NON-PoE and am not able to find this in the product data sheet. Understand the environment specs but need to device BTU output for HVAC planning in the data center, Thanks Scott

If I do a "show system status" command on a vEdge the output lists a number of CPU values : Load average: 1 minute: 0.11, 5 minutes: 29, 15 minutes: 38Processes: 241 totalCPU allocation: 32 total, 3 control, 29 data, 1 tcpdCPU states: 11.00% user, 10...