Routing and SD-WAN

Dears, OSPF diagram show as belowR1 (Area 12 ) ---- R2( Area 0) ---- R3 (Area 0)---- R4(Area 10)if only R1 loopback 0 interface  advertised to R3  and only ABR router summurize to Area 10 , how to configure   Best Regards,    

HelloWe have Cisco ASR1001-x that crashes with this error ROM by Critical process cmand fault on rp_0_0 (rc=134) I didn't understand exactly what went wrong what could be the issue here?   

AKIPS monitoring tool keeps intermittently showing ASR-920-4SZ VADM : VX1 nonoperational then shows ASR-920-4SZ VADM : VX1 ok         This happens for VX,VP, VH, and AUX  Cisco IOS Bengaluru ASR920 (PPC_LINUX_IOSD-UNIVERSALK9_NPE-M) Version 17.6.6 RE...

Hey guys I am looking at one of the switches my team supports and my coworker says these discards are normal but wanted to bring it up here to see what you guys thought.  Never hurts to have a second set of eyes. Ethernet1/7 is upDedicated InterfaceH...

Hi team, We are facing some issue on AnyConnect access, and we noticed that when we have multiple users, the connection attemps timeout. I saw that I do not have any anyconnect licenses installed on this router. What I want some help is to understand...

Physical vs Virtual design issue that I'm looking for feedback on, I have a WAN architecture that links outlying user sites back to a core site via Ethernet Private line service.  Three sites connected via three "ethernet" links.  I then layer a VTI ...

Does ISR 4431 support the GH group 14 in the VPN S2S configurationwe created a policy with group 14 but not worked, after changing it to group 5 working normally

Can anyone please help if there is support of Inter VRF route leaking with PIM BSR/Dynamic RP in Cisco.Also if possible could anyone please share the configuration.

Hi All,   I have an issue for my router version is ISO XE 3.16 with Appx license installed. when i input the command in global mode : ip sla auto discovery the command seen does not exist in the router. when i show ip sla auto discovery its show disa...

Dear ExpertsI have setup SDwan lab setup. So far everything is ok like Vmanage/vBond/Vmsart are up, vEdge are connected and showing up on vManage. What i dont understand is that vBond doesnt show anything in show control connections. I can see DTLS c...

Hi, I have a cisco 1941 router at the remote site with that , we need to create a MPLS connection to the server using the MPLS switch at the server. So my question is that is the 1941series router is compatible to use or should we use any new router ...

If I can cloud connect with Microsoft, Google and Amazon using private network path.does it mean that no need to use MPLS and DIA and even site to site VPN any more?Is MPLS and DIA replaced by Cloud connection with private network?In Microsoft etc pr...