Routing and SD-WAN

Dear Cisco Friends I got a puzzle for you.  I'm currently experiencing weird Network behaviour. Every 2 hours there is a interruption of the network on a port, after i changed the topology(01.07 16:00) What you think might be the issue?STP = spanning...

Hi Guys, I have in my project one ISP internet line and I want to connect it with two 2950 internet gateway routers, Is that possible? and how? thanks, Mohammad Saeed

In our Cisco 2921 router we have a QoS configured, the router have IOS Version 15.1(4)M10.The problem is that we have in a subinterface a QoS configured to use 13 Mbps to download and upload from Internet, and we notice that some times the QoS allow ...

Hi all,  As in the diagram attached Router R1 Connected to ISP A  using fiber optical cable Router R2 Connected to ISP B  using another fiber optical cable.between R1 and R2 HSRP is running lets say  both ISP 's are giving 100 mb .How can i acheive l...

Hi All,It is the commom question asked by any customer if we go for any new deployment. I normally suggest OSPF and only if we have less devices, i recommend eigrp.I want your expert opinion on this. Regards,VB

Is there any difference in the shaping behaviour of the below policy maps? policy-map SHAPE class class-default  shape peak 1843000 18430 0 policy-map SHAPE class class-default  shape average 1843000 18430 0

I have a default route already configured manually in my routing table, let's say that I have a new BGP connectivity and they start advertising default route instead of whole vrf routes. what would be the behaviour of routing now that I have 2 defaul...

Hi allwe have two point2point link as a media between our side and another customer side. isp one - 4mbps link and isp2 - 100mbps linkin our side configuration :-int gi0/1ip add 192.168.111.205descr one ispint gi0/2ip add 192.168.111.210descr second ...

Is it possible to have 1 ISP connected to the Primary ASA and another ISP to the Secondary ASA? Both connections will be active but if one ISP is to fail, all traffic would failover to the active ISP. Can this be accomplished in an Active/Active stat...

Anyone have any additional insight to this error message?%NHRP-3-PAKERROR: Receive Error Indication for our Error Indication, code: protocol generic error(7), offset: 0, data: 00 01 08 00 00 00 00 00 00 FF 00 48 7C 73 00 34I google'd and the only thi...

Hello,I am no expert in Cisco but definitely did not have problems in the past. So I have here a Cisco 891 which needs to be configured and I cannot see how. The sdm wont work like the old days, the ccp simply stucks or keeps giving errors. I would b...

Hi,From site a I can't ping Site B router 3(10.34.63.59) but I can ping R2 of site B switch and workstation.Details:from Site A R1IP Route  10.0.0.0/8 is variably subnetted, 7 subnets, 4 masksC       10.34.34.0/30 is directly connected, Tunnel3C     ...