Routing and SD-WAN

Hi all.I've been tearing my hair out with our shiney new 3560-X (IP services).I'm trying to implement PBR, but to prevent traffic from being black-holed I need to verify availability of the next hop which I'm setting.I won't waste time explaining our...

Hi there,Cisco say that 2960-24PC-L switch has performance 32Gbps, can anybody explain me in detail formula for calculation of 32Gbps?We know that, this switch has only 24 port 10/100Mbps and 2 ports 1Gbps = 24*100*2(ful duplex)+ 2*1000*2(full duplex...

Hi everybody.When i look at list a BGP router cheks to choose the best bgp route, I don't see " community" is listed. My understanding is we can use community to identify the group of routes and manipulate their attributes such as setting prepending ...

Hello,i want to aggregate the following L3 Ethernet Fibrelinks in a central site. It´s planned to use BGP an Routing Protocol:13 x 1 Gbit10 x 100Mbit  3 x 10 Mbit 7x 10 Mbit (Backup links, with only 2 Mbit bandwidth)1-2 10GbitThat central site will b...

Router 3845 appears to stop working, restart the router, the device is working properly, this failure phenomenon has appeared two times I have c3845-advipservicesk9-mz.151-2.T2.bin upgraded to c3845-advipservicesk9-mz.151-4. M3.bin, been unable to fi...

Hi,I need help on determining whether the Cisco 3560x platform is capable of supporting DLSw and whether additional licenses are required to enable this feature. I will be running the IP services software image and be using DLSw to carry IBM SNA traf...

Hi partners,I  have one problem, i need programing a AS5400XM with interfaces PRI and  signaling R2, how i cant enable the interfaces for dial-in and dial-out  in this equipment, please somebody cant helpme.------------------ show version -----------...

Good morning.I have following example schemaSIP PHONE -> CISCO 887 -> SIP GATEWAY1) SIP phone register on SIP gateway and sendREGISTER sip:sip.gateway.com SIP/2.0Via: SIP/2.0/UDP 10.111.111.6:5060;branch=z9hG4bK-t8pe125htptd;rport ......2) Everything...

Hi,Does anybody know whether Cisco 887's support DLSW? If so does the 887 platform require additional licenses? I have a customer who needs to use DLSW for their IBM SNA traffic.Ravi

Hello Cisco Forum,once again I come to ask for advice.(We run EIGRP on a Hub&Spoke network with two ISPs providing a mixture of connections to around 30 spoke sites.There are two central routers with IPSEC/GRE tunnels to all sites, one primary and on...

Hello,i'm looking for an Access Router to connect sites with up to 1Gbit over an Fibre Ethernet Link to a central access Router. The LAN site will be connected over a 802.1q trunk to an (non) cisco switch and there will be four IP-Adresses on four su...