Routing and SD-WAN

I have a 7204VXR with 1000base-sx gbic in it.  Will this handle only multi mode patch cords or will it run ok with a single mode patch cord?  What will happen if I use a single mode patch cord?  I only need to cover about 10feet and the other device ...

Hello guys, I'm puzzled by example given at http://www.cisco.com/en/US/tech/tk365/technologies_tech_note09186a0080094431.shtml#bestpath section: Example: BGP Best Path Selection. Router R1#show ip bgp vpnv4 rd 1100:1001 10.30.116.0/23BGP routing tabl...

I have a pair of circuits from a vendor to our MPLS cloud.The primary is a straight MPLS circuit at 1GbThe secondary is now being provided on the vendors next generation network with includes local routing within the metro area.They are provided to s...

Hi folks, so after a string of our Cisco 1941W crashes, I have been playing with various versions of IOS. It seems all IOS versions available for download are either ED (Early Deployment) or MD (Maintenance Deployment). I never see a GD (General Depl...

Hello, Please advise if there is any difference between configuration of cisco 2651 and 2911 routers               I'm going to migrate router 2651 to 2911

I'm trying to run the Cisco CSR 1000v on a standalone ESXi 5.1 host and I'm getting the following error:My host is an IBM x3650 with Intel Xeon X5450 CPUs.  Anyone know what this error is exactly?  I'm guessing my hardware is maybe too old and is mis...

I have an ASR1001 installed and I want to implement the firewall feature set.The current license level is IPbase and I have the firewall feature installed. The firewall feature shows acive, Not in use. I have tried to activate it without success.  My...

Basically in my setup, I have AS65501 and AS65502.  AS65501 / AS65502  know all but a couple PEs from each respective AS (Provider exported  some routes for Inter-AS Option C L2VPNs).  Thus, I would some support of the RPF vector to alleviate some of...

hi all,I need to create two diffrent site to site vpns between two Branch Routers(attached).I already implemented this with my branch 1. Now I need to implement this with Branch2.First S2S VPN : HQ Router to Branch 1Second S2S VPN : HQ Router to Bran...

Dear Expert, I'm making constitution for ASR1002.I would  like to use 10 ports for Gigabit Ethernet port. I made constitution for ASR1002 as below. -Cisco ASR1002 Chassis,4 built-in GE, Dual P/S,4GB DRAM  -SPA-10X1GE-V2 x 1  -SFP-GE-T      x 10Is th...

Anyone can help me?Encountered problem in configuring frame relay multipoint.Status 0x0.All the router not connected. When do ping result is host unreachable.Configuration in Router HQ >>1. int Fa0/0: 192.168.0.78/292. int Serial0/0    encapsulation ...

I have an engineering group that wants us to set up a separate R&D network, that will be primarily used for testing of their equipment, which creates a lot of broadcast traffic, but on occasion they will need to access some information on 3 engineeri...