Routing and SD-WAN

We do business with a company that has two ISP connections to Internet.This company advertises their IP Address block from both providers, but the preferred path from us to them has more latency than the other path does.I can see from traceroute that...

Hi,I am researching on routers behavior using a device I'm planning to make. What I want to test is that I want to connect my LAN network to WAN network through my device. All types of traffic can be transceived i.e. TCP, UDP, VLANS etc etc. The prob...

Hi,We are recieving two separate last mile fibers from  our ISP. We are receving two separate /30 subnets from the ISP and a  separate /28 pool. Now the first pool for instance is x.x.x.128/30, the  second one is x.x.x.136/30 and the last pool is x.x...

Here is the issue I am having:I have a single 7204XVR Internet router with two active Internet connections. One connection is ISP1 (Primary) and 50MB, and one connection is ISP2 (Secondary) is 4.5MB. We have customers from all over the Midwest and Ea...

Hi,How can I implement LFI functionality on a IOS router when the uplink is an Ethernet port? The uplink connects to a satellite modem that offers 256Kbps up/down. We need LFI for our voice.Regards,ErikSent from Cisco Technical Support iPad App

Hi,I have 3 cisco 2800. R1 is my main router which is working fine with it,s bgp.Now I have configure bgp with hsrp on R2 and R3 asRouter R2 config :Router#sh running-configBuilding configuration...Current configuration : 1600 bytes!version 12.4serv...

Hi All,I really hope someone can help me as I am struggling to solve this one. I can't see what is wrong.I am trying to configure it to run on ADSL but I am getting large amounts or errors when I run "sh dsl int atm0" and can't work out why?I am gett...

How can we judge real time bandwidth on port/ip/application?? Thx in advanceSent from Cisco Technical Support iPhone App

Hi all,I have a psudowire connection between two data centers. When I connect my switch port on one end to a port on data center switch, should the link light come up even if other end is not connected? Assuming ports on one end of link are turned up...

Dear all,I'm in an issue w/ on of our ISPs. We're using an ADSL line as a secondary ligh load line ( 16 MBit, /w PBR in place toseparate the 80 and 443 from the business-critical applications running via a SDSL link. ).I am on a 2611 XM with IOS 12.2...

HiI am asking this question because there are so many different information about in which layer frame relay and adsl operate.I was sure that Frame Relay operates just in Layer - 2, has nothing to do with Layer - 1. But some web pages say that FR ope...

when show ip flow top-talkers command is excuted on my router for particular ip it displays as 36M under bytes.But the link is of 10Mbps.Why is it displaying as 36M

I have a new MPLS connection and the setup is completed. I am able to ping from CORE_Router to CORE_ROUTER_QAT, however I am not able to ping LAN on both the sides. Below is the layout.                                                     CORE_ROUTER ...

Hi,I have trying to solve this for a while now without success so I think its time to enlist some help.I have a Cisco 871W connected to a cable modem for WAN which works without an issue. What I am trying to do is create an PPTP tunnel and route cert...