Routing and SD-WAN

I posted a question about this problem a few days ago, but so far I haven't been able to solve it. I was hoping posting a different question might get me started in the right direction. I have two VRF fast Ethernet interfaces that need to talk to eac...

Hi,Can any one tell me how to enable protection path in GSR 12404 router Gigi interface connected to mux port. Like we configure APS group for POS interfaces.Rgds,Vikram

Hi,I have been advised by my service provider that to do ATM IMA I need an AIM-ATM and a VWIC2-2MFT-T1/E1 card,  and that IMA is not support on the VWCI2-2MFT-G703 card.Can anyone confirm if this is true ?Thanks

How can we have 23 micro second response times in  multi-hop IP network for Tele-medicine requirements. Think of QoS needs  for live remote surgery. Will IP networks suffice for critical medical  NW ?http://www.linkedin.com/groups/How-can-we-have-23-...

I work for a MSO in a large metroplitan area. We are experiencing what we refer to as 'modem cycling' on what seems like random ports on a few of our Docsis 3 10k's. All modems drop at the same time, and then will come back up within a minute or so. ...

HiI'm having some weird issues with operating ip cache-flow with multicast routing, when this feature disabled multicast traffic started to flow.Is there any compatiblity issues with the multicast and cache flow?, I need to have both the multicast ro...

Hi,Im having a cisco 7206 VXR router which is having high CPU utilization due to interrupt. The attached is the  logs of the device.Can Anyone let me know the cause of this issue.

Dear     I got a Cisco C880 router( IOS version: 15.1(2)T1 ) with PCEX-3G-HSPA-G card installed     When I insert my 3G card and issue show cellular 0 network, I found that the network is not my 3G card ISP, may i ask how can I manual select the ISP?

HI all,   7200 VXR router got rebooted after due software crash dump.I have replaced NPE-G1 but still router is rebooting. Currently I am running with 12.4 (15)T 13 IOS.Crash Dump file is attached.Thanks a lot in advanceRegards,Ajith.

I'm still trying to get the circuit connected to my new VWIC card working correctly.  I get a CD light on the VWIC card, as well as an alarm light, but the circuit shows as down/down.  If I throw a hard loop in front of where I plug into the circuit,...

Hi,In our class, we were asked to enable rip on two routers, 1 of which connects to a LAN via router on a stick (intervlan enabled) and R2 connects to a single PC.When I configured RIP v2 on both router, RIP advertisements are not propagated.Please s...