Routing and SD-WAN

HiUp til now, I have only had one management network, flat L2 with no routing.I`ts getting to big now, and I`m splitting it up in several segments.Need routing between the networks, but it should not be reched by any other networks that the managemen...

hello,I have a 2621 XM router with an ADSL WIC and WIC ethernet.I use that, and 2 as all WAN.erhernet as the principal and the ADSL fail over in case of Ethernet.is possible with this router? if so, how can I configure it?Thanks to allDaniel

Hi all.I have a customer which has topo network like this picture. From FTP A, I can upload any file to FTP C, but I only download (via using FTP service) .rar file from FTP C, and it's impossible to download any other file types. With an .exe file, ...

Hello folks,  a customer of us asked if C2911 (to be bought) is ok for partial BGP routes.This is the situation:2 cisco 2911, each peering with 3 other AS (AS1, AS2, AS3), and maybe, in the future, at a small IXP (AS4, AS5, AS6, AS7).They will accept...

Hello NetproI want to isolate Guest user traffic from LAN traffic and allow them internet only. All internet browsing traffic is through Microsoft ISA Server.Guest can connect using Wireless Access Point which is also shared with Data Network.Microso...

Hi All,We have 3845 Router which is using for only Internet connectivity with one ISPScenario:ISP1 ----Cisco 3845----IPS-------- Cisco ASA5580-20-----Cisco 4510R-----2960                                                                                ...

Hi,I need to be able to do RDP down an IPSEC tunnel between 2 877 routers (Site to Site VPN) as well as allow RDP in from the internet interface.so I have a ip nat source static tcp 192.168.1.5 3389 interface dialer0 3389to permit the external traffi...

Im trying to configure an SR520 with the CCA, but every time I try and apply the changes to the router i get the following error."java.lang.nullPointerException"Using CCA 3.0(1)and Java Version 1.6.0_16 from Sun Microsystems IncI assume this is an is...

Can someone help me with a EEM configuration that would reset an interface on the router and force a re-dhcp when connectivity is lost to an upstream router? I would like the applet to run every 15 minutes. I am thinking of an event that is triggered...

Hey There,Has anyone ever successfully configured a router with two seperate 3G modules in itWe are attempting to bring up two dialer interfaces and are running into some issuesWe have made 2 chat scripts2 seperate dialer interfacesand applied the ch...

Do I need to purchase a RTU license to use BGP?  Checking the Feature Navigator it looks like it is in the IP Base License, but  I thought that BGP was supported in an IP Services image.   Since there isn't an IP services license for the ASR software...

I just purchased thie Cisco 2921 router and have all the configuration completed except the Firewall and NAT. We have 4 supnets at our location on the router each with a DHCP handed from the router to our network. Any examples for the Firewall and Na...