Hello where i can mistake, from VPC i can't ping SW2|3 also VIP?SW2interface GigabitEthernet0/0switchport trunk encapsulation dot1qswitchport mode trunknegotiation auto!interface GigabitEthernet0/2switchport trunk allowed vlan 10negotiation auto!inte...
Hi,I have a requirement to take a service from a supplier who is directly connected to a Cisco ASR 9001 and is providing services via tagged vlans. I need to terminate this service on a Cisco ASR 1001-x in the network. I thought the best way would be...
Dear Team, Good evening. Kindly help us to rectify the below issues: Unable to access the WLC, as the IP address is not responding to ping.Unable to access the Core Switch (Primary) via PuTTY, as the password is not being accepted for the given IP ad...
Hello, could someone explain how Cisco RTU licenses work?I have an ASR1001X with temporary licenses. This is also affecting the throughput rate, which drops from 10G to 2.5G. Smart Licensing is disabled.From what I understand, the RTU license is tied...
Hello, everyone. Ever since I started studying BGP, I never understood why a default route cannot be used when we want to form a multihop adjacency. In other words, the router will refuse to use the default route to reach the IP specified in the neig...
Hello, everyone. Cisco documentation for running BGP on IOS-XR states the following: What exactly does the higlighted part mean? If it boots up with some loopbacks configured, it picks the one with the highest IP? Or what does it mean by "saved loop...
Hi.. I am trying to extend a lab on my own. I want to make a multi-area OSPFv2 setup using Cisco 2911 within the PT. The HQ router (lar001) has the following setup:router ospf 1log-adjacency-changesnetwork 10.10.0.0 0.0.0.3 area 0network 10.1.0.0 0....
Hello Community, I am dealing with a very strange BFD issue on a Cisco SD-WAN deployment (IOS-XE 17.05.04c). While the majority of our sites using the same template and transport are working perfectly, two specific sites are experiencing a BFD DOWN s...
I did something I shouldn't have and messed with my ACL's and accidentally blocked all my traffic to and from my interfaces and then saved before the buffering hit and the router kicked me out. I have tried going through the console port to reset the...
Hello, everyone I understand that an IS-IS router can be configured with multiple NETs. It is in fact possible to configure up to three different NSAP addresses on an IS-IS router in a single IS-IS instance, provided that the System ID in all NSAP ad...
I’m reaching out because I’m having trouble completing the Static Routing lab. I honestly thought I configured everything correctly, but my server in the Basement Server Room will not ping the PCs in the Office Area network.I’ve double-checked the IP...
Hello!I have upgraded yesterday the IOS of my 1841 to Version 12.4 (24) T3. Since the I have every 2 seconds Late Collision:Sep 7 05:06:17.595: %GT96K_FE-5-LATECOLL: Late Collision on int FastEthernet0/1Sep 7 05:06:18.531: %LINK-3-UPDOWN: Interfac...
Hi Team, I'm finalising a design that requires IP SLA ICMP Echo as the object tracking method for HSRP and static route failover on the following platforms: NCS 5000 series (IOS-XR) NCS 500 series (IOS-XR) Background: This is a confirmed and well-...
Hi all, I'm posting for a group of students attempting to make a network for a class. We currently have a Cisco 2811 router we are configuring. We can ping within the local network but we can't seem to ping to the internet. We have tried everything w...
Hi, Appreciate your help please to confirm if the below setup to be able to extend the 5G antenna of the 5G module P-5GS6-R16SA-GL is correct or not? As per my understanding it should work as per below, using the P-5GS6-R16SA-GL module which has fema...
