Hi team,please i want to know if the BGP Additional paths ensures the sharing Traffic on eBGP sessions or no !Also please i want to check with you if the Nexus 9K VABF switches support ecmp at the interface level or bgp or not because i can't find th...
Forum Posts
Resolved! Route-map
#route-map name permit ?# <0-65535> Can we give whatever number here, not sure on the use case.
Hi Please find the attached Diagram for Reference:We have our own APNIC pool which we have advertised to ISP-1 and ISP-2 as shown in diagram.On ISR routers we are Advertising 1.1.1.0/24 to ISP-1 and ISP-2 via EBGP and receiving Default route on both ...
I have a one lab environment. I trying to redistribute rip and ospf. Rip network inject from 2 sides routers 3 and 4 , I applying the Route-map to TAG the injected routes from both.But I figure out some OSPF Routes (10.10.10.0 and 192.168.25.0) netwo...
EIGRP 199 is used between HO & BR router but no any neighborship is formed. NOTE: no any config is done on ISP switch, it's just a L2 switch. Point to point is pinging. [TOPOLOGY is attached below] CONFIG:HOhostname HO!boot-start-markerboot-end-...
Resolved! VLANs in a routed environment
So this may seem like an ignorant question but I'm a bit confused...it seems to me that when you have a VLAN in a purely switched environment you can control what Endstations on those vlans can communicate with other endstations simply by using the a...
Hello guys. I'm learning about firewalls currently and have been trying to incorporate a firewall for a bank WAN (very basic design to help me understand better) in my packet tracer. I'm having slight issues with routing, I was wondering if anyone m...
Buenas tardes, Me gustaría su apoyo con lo siguiente referente a un equipo Router ISR 2951: ¿Cual es la capacidad de Throughput recomendado/máximo?En la documentación oficial de cisco he encontrado que lo recomendado son 75 mbps¿Para dicho modelo, es...
Resolved! next-hop null with default route
Hi, I have a router where i need to do some sumarization. I will have some of the sumarized routes in route table but some of them are pointing via default roue towards some firewall. I will need to advertized those routes but not the default route...
I couldn't ping the IPSec routers even though I did access list. I attached the topology and the addressing table for the reference. I really hope someone really could help me.Addressing TableTopologyI'm trying to configure IPsec and access lists, I ...
Resolved! NAT overload VRF to Global
On a C1101-4P two VRFs "ABC" and "DEF" and internet access on G0/0/0.I'd like to NAT overload both VRFs (VLAN interfaces) to G0/0/0. Here's the relevant config: vlan 10 name ABC ! vlan 20 name DEF vrf definition ABC rd 10:10 ! address-family ip...
sometimes we are getting packet drops, but that time both BGP always up of both links.
I'm wondering if there is any command on cisco devices to show/identify its role as a router, switch and etc. like what we have on CDP neighbors but now for our local device with CLI. In other words, I need a command to identify the cisco device role...
Hi, Considering Cisco Smart licensing usage policy introduced from IOS 17.3.X, what would happen if we turn off reporting interval using the following command? Any malfunction regarding the devices' functionality? #no license smart usage interval Mor...
Hi all,First time posting on here, so please forgive if I'm asking in the wrong topic.I have a C899G-LTE-NA cellular router running on the AT&T network. The modem inside this router is a Sierra Wireless MC7354 (Cat3 LTE).My question is, can I replac...
