Routing and SD-WAN

Is there a possibility to force an IOS XR device to add the hostname in a DHCP request (IOS devices seem to insert it into the DHCP discover)?

Hello, I got a problem on a switch, i have an interface TE who are in a suspend mode.When i check the configuration on Po and on both interface, the configuration is the same... L2 Switch error log : Te2/1/4 is not compatible with Te1/1/3 and will be...

We have an ASA 5510 running 9.1(7)32 and a Cisco 819 LTE router running IOS 15.3(3). I was thinking about building a VTI tunnel between the two, but will it work if both sides have dynamic IPs? What are my options The ASA has a dynamic DNS hostname. ...

Hello, We've a brand new Cisco vEdge 2000 that is in a continuous loop when we start it (TLB exception load/fetch), it keeps the log below over and over never ending. Is there something that can be done to try to recover the box? I believe this is so...

Keep getting "Unable to deactivate Capture" no matter what syntex I try. For most part I do this:  Create a capture called 'PCAP', and capture packets in both directions on Gi0/0/1 Router# monitor capture PCAP interface GigabitEthernet 0/0/1 both ! ...

How to disable aux on 9606 catalyst switch

 I have a Nexus 3K with NXOS 9.3(7) and having trouble configuring BGP on multiple VRFs. I have a config like this on 2 switches: vlan 1 vlan 10   name nx<-external->nx vlan 20   name nx<-internal->nx vrf context external vrf context internal vrf co...

Does anyone know the  difference between these 2 routers please ? Both appear to be LTE, EMEA and NA with ADSL2 Annex A etc.  Only difference is the letter A or E.  I'm guessing A = North America, E = Europe maybe ?  

Hi, I have a Cisco 1811 Integrated Services Router running Cisco IOS version 15.1(4)M10. There is a modem connected to FastEthernet0 and a few devices connected to the switchports (FastEthernet2-9). I used the following command to forward some servic...

Hello, How to configure area authentication and domain authentication on cisco CSR?I am using the following commands under "router isis" to configure authentication. router isis 1 net 49.0001.2222.2222.2222.00 is-type level-1 authentication mode text...

Hey, we are migrating to Google HA VPNs using their community tutorial:https://cloud.google.com/community/tutorials/using-ha-vpn-with-cisco-asa While the VPN and BGP parts are working fine we ran into following issue: Previously we had static routes ...

I need an IKEv2 connection in transport mode between Strongswan and Cisco C819. Cisco is a responder and has a public IP. A device with Strongswan is an initiator and has a non-public IP (it is behind NAT). I got a TS_UNACCEPTABLE error. I think the ...

Hi, I am facing a problem. Would appreciate to have suggestions. When I am trying to write the command "neighbour ***** soft-reconfiguration inbound" in ASR 1000, it is not taking the command, Searched for suggestion but not showing any command like ...