Greetings, I am using several ISR G2 routers (819, 2901, etc) configured as L2TP/IPSec VPN concentrators. I used standard documents and vpdn part now as follows: vpdn enable!vpdn-group L2TP ! Default L2TP VPDN group accept-dialin protocol l2tp virt...
Forum Posts
There are actually many solutions for Cisco SD-WAN out there. Cisco DNA Center, Viptela, WAE, Crosswork Controller and XTC. Can you define the difference between these solutions. I know that DNA Center is used for SD-Access, but Cisco offers this to ...
Hello All, Be noted after reading this document which is provided by CISCO with the subject [Cisco SD-WAN: WAN EdgeOnboarding] https://www.google.com/url?sa=t&rct=j&q=&esrc=s&source=web&cd=&cad=rja&uact=8&ved=2ahUKEwjs3fjxhPHsAhW-UhUIHWNkBVcQFjAAegQ...
ola, Coming back to you again with something new I set my network, 1x router also he is a dhcp server 1x switch and a laptop.The problem is with the dhcp I can't get ip with dhcp and go to the internet down i will paste the router and switch config ...
hi everyone, i'm currently preparing the exam of computer network at the university, and i'm trying to solve a text exam for which there's something that i can't understand. As the text says, vlan p and b are used for linking between routers ra, rb, ...
We have started using an external SIP service for our phones.Normally traffic goes through an MPLS WANwhen going thru this service we need to NAT the phone subnet from a 10.xx.xx.xx network to a 172.xx.xx.xx network,but only when going to the SIP ser...
Greetings, sorry if my message going to be long:i live in lebanon and we have a very bad ISP over here, and was looking forward to improve my connection by subscribing to Leased Line, it took me 2 weeks just to be able to talk to an engineer and he t...
I have a 9300 switch and 4431 router participating in EIGRP. The router redistributes EIGRP into BGP, and vice versa, for its WAN connection. That is working fine. However i'd like to summarise the many small routes advertised from EIGRP so that BGP...
Resolved! Issues with room network
I have a Gigabit internet connection, but not receiving that connection through my Cisco Router & Switch. I have placed both the Router & Switches "sh run", "sh int br" & "cdp neighbor" Fios router nor showing in cdp (as far as i know) Network works ...
Hello everyone,, I am wondering what would be the best and inexpensive Cisco router and switch to use for my home. I want them to have the full current Cisco IOS CLI on it so I can practice and gain knowledge for my CCENT and beyond. I also want to u...
We have 2 instances running for OSPF, one in the global and other using student vrf.I need to change to Area type from stub to nssa for instance associated with vrf.Both global and student have config for area 16. changing area 16 type for ospf 1 was...
hy, I have a intranet that is base on a 1x router 2611xm, 1x switch 2950, the net is ok, it's working but my problem half security, 1/2 pppoe conection and 1/2 inter-vlan routing I will paste the config from router here to talk direct on. Building co...
Hello, i have a C887VA-WD-E-K9 and i am planning to move the line from ADSL to VDSL2. Now i run this (c800-universalk9-mz.SPA.157-3.M6.bin); Firmware Source File Name-------- ------ ----------VDSL embedded VDSL_LINUX_DEV_01212008Modem FW Version: 4.1...
I have a new IR1101 industrial router with IOS XE v17.03.01. It appears to save the config, but I can not view it. Doing show run or show start displays a simple/basic config with nothing in it. For example I configure hostname, reload, the router wi...
Hi We have a nexus 9k switch running bgp ipv4 unicast with the CE router. There are multiple vrfs between the nexus 9k and the CE. We have one bgp neighborship between the Nexus 9k and the CE (VRF-Lite). The nexus 9k have 2 firewalls connected. One f...
