cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

113
Views
0
Helpful
2
Replies
Beginner

2 router, 1 ISP Link & 2 different class public network

Hi, I have 1 router (Cisco 1812) and 1 Firewall (ASA 5505), 1 ISP Link & 2 networks (one is 192.168.88.0 & another is 192.168.44.0). I want to pass 2 networks by 2 different devices, like 192.168.88.0 will be passed by ASA Firewall & 192.168.44.0 will be passed by Router. 

Different class Public ip ( 10.10.10.0/29  and 172.16.31.96/27). In our system ASA is working fine and public IPs are already using by servers. 

In ASA 10.10.10.0/29 default route 10.10.10.6  and here everything is working fine.

 

 

I want to configure 172.16.31.96/27 on Cisco Router & Default route for this network is 10.10.10.5.

 

How can i do this in  router ? How the natting will be done??

 

Can anyone please help me in this issue urgently??

2 REPLIES 2
Highlighted
Beginner

Hi, Many solutions/techniques

Hi, 

Many solutions/techniques are available to achieve load-balancing or load-balancing with failover but the actual solution is depend on your topology and requirement. So please share topology along traffic flow as you want control.

 

Don't forget to rate helpfull posts.

Sajid Ali Pathan

Participant

This discussion has been

This discussion has been reposted from Cisco User Groups to the WAN, Routing and Switching community.

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards