2611XM + VWIC2-2MFT-T1/E1

[andrei.goncalves]

Hi there !

I have a 2611XM in a branch, with some gateways (only 8 ports)... I'd like to change it to a E1 .. how can I check if this router supports this interface ?

I looked for this router in Cisco Configuration Tool.. but it's not there ...

Any help ?

Thanks.

Andrei.

[purohit_810 · Accepted solution]

Here is the available

http://www.cisco.com/en/US/products/hw/routers/ps259/products_relevant_interfaces_and_modules.html

Thanks,

Dharmesh Purohit

[Collin Clark · Accepted solution]

It's usually easier to look up the card and see if it's supported in the router. Here's the data sheet for the VWIC (it is supported w/IOS 12.3(14)T).

http://www.cisco.com/en/US/prod/collateral/routers/ps5855/product_data_sheet0900aecd8028d2db.html

Hope that helps.