cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
189
Views
0
Helpful
2
Replies
Highlighted

2960-X QOS Configure issue

I entered the following into a 2960-x;

 

mls qos srr-queue output dscp-map queue 1 threshold 1 1 2 3 4 5 6 7
mls qos srr-queue output dscp-map queue 2 threshold 1 8
mls qos srr-queue output dscp-map queue 1 threshold 1 9 10 11 12 13 14 15 16
mls qos srr-queue output dscp-map queue 1 threshold 1 17 18 19 20 21 22 23 24
mls qos srr-queue output dscp-map queue 1 threshold 1 25 26 27 28 29 30 31 32
mls qos srr-queue output dscp-map queue 1 threshold 1 33 34 35 36 37 38 39 40
mls qos srr-queue output dscp-map queue 1 threshold 1 41 42 43 44 45
mls qos srr-queue output dscp-map queue 3 threshold 1 46
mls qos srr-queue output dscp-map queue 1 threshold 1 47 48 49 50 51 52 53 54
mls qos srr-queue output dscp-map queue 1 threshold 1 55
mls qos srr-queue output dscp-map queue 4 threshold 1 56
mls qos srr-queue output dscp-map queue 1 threshold 1 57 58 59 60 61 62 63

 

after copying the running and startup config, show config had this output;

 

mls qos srr-queue output dscp-map queue 1 threshold 1 1 2 3 4 5 6 7 9
mls qos srr-queue output dscp-map queue 1 threshold 1 10 11 12 13 14 15 16 17
mls qos srr-queue output dscp-map queue 1 threshold 1 18 19 20 21 22 23 24 25
mls qos srr-queue output dscp-map queue 1 threshold 1 26 27 28 29 30 31 32 33
mls qos srr-queue output dscp-map queue 1 threshold 1 34 35 36 37 38 39 48 49
mls qos srr-queue output dscp-map queue 1 threshold 1 50 51 52 53 54 55 57 58
mls qos srr-queue output dscp-map queue 1 threshold 1 59 60 61 62 63
mls qos srr-queue output dscp-map queue 3 threshold 1 46
no mls qos rewrite ip dscp
mls qos
!

Is there a reason some of my entries didn't save?

How cna I delete them and re-enter all of them, or is there another way to fix this?

This config is to have DANTE running on the switch. 

DANTE needs DSCP 8 on queue 2, DSCP 46 on queue 3 and DSCP 56 on queue 4.

How do these queues match IP priority?

Should I create a DHCP>COS map?

Please help

Thanks,

Bill 

 

2 REPLIES 2
Highlighted
VIP Expert

Re: 2960-X QOS Configure issue

The commands that didn't save might be defaults.
Highlighted
VIP Mentor

Re: 2960-X QOS Configure issue

Hello,

 

after you have entered the new values, and before saving the running to the startup config, does:

 

show mls qos maps

 

reflect the new values ?