cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
485
Views
0
Helpful
1
Replies

3845 vwic2-2MFT-T1/E1

oneirishpollack
Beginner
Beginner

I have a 3845 edge router connected to the Internet via four T1s and a HWIC-4T1/E1 card. We are adding two more T1s to the mix, and I have a VWIC2-2MFT-T1/E1 card. Here are my questions:

1. Is it correct to state that the VWIC2-2MFT-T1/E1 can support data in addition to voice?

2. I can use the HWIC and VWIC cards together to utilize the 6 T1s together?

3. Do I just add the card, configure the new slot, and add it to the same channel group?

Below is the current config regarding the existing card HWIC:

card type t1 0 0

security authentication failure rate 3 log

security passwords min-length 6

logging message-counter syslog

logging buffered 51200

controller T1 0/0/0

cablelength long 0db

channel-group 0 timeslots 1-24

!

controller T1 0/0/1

cablelength long 0db

channel-group 0 timeslots 1-24

!

controller T1 0/0/2

cablelength long 0db

channel-group 0 timeslots 1-24

!

controller T1 0/0/3

cablelength long 0db

channel-group 0 timeslots 1-24

Thanks ahead of time. I will be sure to rate.

1 Accepted Solution

Accepted Solutions

paolo bevilacqua
Hall of Fame
Hall of Fame
1 Reply 1

paolo bevilacqua
Hall of Fame
Hall of Fame

1, 2, 3: Yes.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: