3845 with WIC-1DSU-T1

[r3alityc0d3r]

We have a 3845 router that I have been tasked with setting up to replace our 2600 and VG200. The problem I am running into is that our WIC-1DSU-T1 cards are not recognized by the 3845. I have IOS version 12.4(11)T loaded on the 3845. when I do a show diag i get:

WIC Slot 1:

FT1 BT8360

WIC module not supported/disabled in this slot

Hardware revision 1.5 Board revision G0

Serial number 31589541 Part number 800-03279-04

FRU Part Number WIC-1DSU-T1=

I can't find documentation anywhere that says for sure that this card is not supported in the 3845. Has anyone got this to work? I don't want to upgrade to the v2 version of the card unless i have to. Thanks in advance.

Bill

[spremkumar]

Hi Bill

Can you post the output of show version here ?

regds

[jolmo]

Hi Bill

Unfortunately, you need V2 version for 3800 routers. See below:

http://www.cisco.com/en/US/products/hw/modules/ps2641/products_module_installation_guide_chapter09186a008007cb95.html#wp1116886

Hope this helps