cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
289
Views
10
Helpful
3
Replies

3900 Replacement Card

johnlloyd_13
Level 9
Level 9

hi all,

we've got some few old routers that will be replaced to a 3925 router.

my question is, are the old cards PA-MC-8TE1+ (from 7206VXR) and VWIC2-2MFT-T1/E1 (from 2911) compatible to VWIC3-2MFT-T1/E1=

http://www.cisco.com/c/en/us/products/collateral/routers/2800-series-integrated-services-routers-isr/end_of_life_notice_c51-729577.pdf

3 Replies 3

Hi John,

The VWIC2-2MFT-T1/E1  can be used on the 3925, but the PA-MC-8TE1+ can't.

see link below for module support on !SR 2 routers.

 

 http://www.cisco.com/c/dam/en/us/products/collateral/routers/1900-series-integrated-services-routers-isr/aag_c07_563807.pdf

hi,

i understand that either VWIC2-2MFT-T1/E1 or VWIC3-2MFT-T1/E1 can be used on a 3925.

how about the E1 circuits on a 7206VXR using PA-MC-8TE1+? if we replace 7206 with 3925, can the E1s use either VWIC2-2MFT-T1/E1 or VWIC3-2MFT-T1/E1as well?

also, can someone tell what's the difference between VWIC3-2MFT-T1/E1 and VWIC3-2MFT-G703?

John,

yes The E1s can use the VWIC3-2MFT-T1/E1

as far as differences between VWIC3-2MFT-T1/E1 and VWIC3-2MFT-G703

its all about the type of interface from your Provider. I know when we put gear into China we had to use G703 interfaces as that is what was provided.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: