3925 Gig Interfaces

Todd Kelly · ‎11-25-2014

I have a 3925 with 4 Gig Integrated Interfaces and 2 SFP GI0/0 and GI0/1. Will I be able to use the SFP interfaces if the integrated GI0/0 and GI0/1 are being used?

Thanks.

Todd

John Blakley · ‎11-25-2014

Todd,

I believe those interfaces are either/or meaning that you can use either rj-45 or an sfp, but not both for the same port.

HTH,

John

HTH, John *** Please rate all useful posts ***

paul driver · ‎11-25-2014

Hello

If you mean connecting sfp copper GB module to a integrated copper GB port then yes you can.

res

Paul

Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Aref Alsouqi · ‎11-25-2014

Hi,

I do agree with John, you would not be able to use both on the same module at the same time.

Regards,

Aref