cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
1058
Views
0
Helpful
4
Replies
Spagsterj
Beginner

3945 Ethernet Switch Module

Hello,

I have a Ethernet module (SM-ES3G-16-P) installed in a 3945 router and noticed during first boot no licenses are active at all. I would assume at a mimimum ipbase would be active.

With this module, does static routing work with just ipbase?

Example:

interface g0/1

no switchport

ip addr 192.168.254.2 255.255.255.0

!

int vlan 1

ip addr 172.16.1.2 255.255.255.252

!

ip route 0.0.0.0.0 0.0.0.0 172.16.1.1

switch#show license

Index 1 Feature: advipservices

        Period left: 0  minute  0  second

Index 2 Feature: ipservices

        Period left: 8  weeks 4  days

        License Type: Evaluation

        License State: Active, Not in Use, EULA not accepted

        License Priority: None

        License Count: Non-Counted

Index 3 Feature: ipbase

        Period left: 0  minute  0  second

Thanks!

4 REPLIES 4
Alessio Andreoli
Contributor

Yes it does. Static routing will work with ipbase.

Alessio

Is there a maximum of static routes?

Sent from Cisco Technical Support iPhone App

Peter Paluch
Hall of Fame Cisco Employee

Hi,

I do not recall seeing any artificial limit on the count of static routes with IP Base on 3945 routers. I believe there is no practical limit.

Best regards,

Peter

Hello  Spagster

The configuration taht you post is all from de SM. also can you help me with the steps to do the initial configuration f the SM

Thanks