Re: 4500 Teaming Issue

unpnp17 · ‎09-14-2018

Hi Everyone,

We're teaming between 2 4500 switches (it works as active-passive) that we deploy as backbone switches. we are teaming 2 ports from 4500 to edge switches are active while some VOIPs are done but some are not. But when we command shutdown one of the teaming ports, VOIP phones are all working. how could we tshoot?

thanks.

paul driver · ‎09-14-2018

Hello

if you aggregating on the edge ports then the device attached to them should also be able to support that aggregation?

Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul

Leo Laohoo · ‎09-14-2018

@unpnp17 wrote:

We're teaming between 2 4500 switches (it works as active-passive) that we deploy as

Is the two 4500 in a VSS or not?

blackswans · ‎09-16-2018

Yes they are working VSS.

nazimkha · ‎09-17-2018

if you still having issues you can share the configs from the 4500 and the VOIP aggregation device