12-09-2012 08:43 AM - edited 03-04-2019 06:21 PM
Hi Guys,
For some reason I don't have the WCCP feature on my 4507E Layer3 Switch.
What can be the cause of that?
This is my sh ver:
Cisco IOS Software, Catalyst 4500 L3 Switch Software (cat4500e-IPBASEK9-M), Version 12.2(54)SG1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 27-Jan-11 12:19 by prod_rel_team
Image text-base: 0x10000000, data-base: 0x12C41C68
ROM: 12.2(44r)SG5
Darkside Revision 4, Nexu Revision 9, Fortooine Revision 1.22
ISR-SW-BACKBONE uptime is 48 weeks, 6 days, 20 hours, 6 minutes
Uptime for this control processor is 38 weeks, 1 hour, 1 minute
System returned to ROM by RPR Switchover
System restarted at 17:39:55 GMT Sun Mar 18 2012
System image file is "bootflash:cat4500e-ipbasek9-mz.122-54.SG1.bin"
Last reload reason: Unknown reason
cisco WS-C4507R-E (MPC8548) processor (revision 8) with 524288K bytes of memory.
Processor board ID FOX1445GBLK
MPC8548 CPU at 1GHz, Supervisor 6L-E
Last reset from Reload
21 Virtual Ethernet interfaces
112 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
511K bytes of non-volatile configuration memory.
Configuration register is 0x2101
Thanks
12-09-2012 09:38 AM
Hi,
It seems that your Sup does not support it:
MPC8548 CPU at 1GHz, Supervisor 6L-E
from the config guide:
Catalyst 4900M, Catalyst 4948E, Supervisor Engine 6-E, and Supervisor Engine 6L-E do not support WCCP Version 2.
more info here:
http://www.cisco.com/en/US/docs/switches/lan/catalyst4500/12.2/54sg/configuration/guide/wccp.html
Also your config-register should be 0x2102
HTH
12-09-2012 11:53 PM
Thank you for the quick reply!
Does GRE supported?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: