Hi I am using Telstra SIM card on cisco 2900 , with slot 3. The current problem is all the profiles inactive, non public IP shown during show run. I called Telstra and they told me they could see the public ip has been already assigned to this router. is there any further conf or test required with this?
here is the show cellular 0/3/0 all
Hardware Information
====================
Modem Firmware Version = SWI9X15C_05.05.58.00
Modem Firmware built = 2015/03/04 21:30:23
Hardware Version = 1.0
International Mobile Subscriber Identity (IMSI) = 505013521753448
International Mobile Equipment Identity (IMEI) = 352761061475225
Integrated Circuit Card ID (ICCID) = 89610180003138189607
Mobile Subscriber Integrated Services
Digital Network-Number (MSISDN) =
Current Modem Temperature = 35 deg C
PRI SKU ID = 9903299, PRI version = 05.10
Profile Information
====================
Profile password Encryption level: 7
Profile 1 = INACTIVE* **
--------
PDP Type = IPv4
Access Point Name (APN) = telstra.extranet
Authentication = None
Profile 2 = INACTIVE
--------
* - Default profile
** - LTE attach profile
Data Connection Information
===========================
Profile 1, Packet Session Status = INACTIVE
Profile 2, Packet Session Status = INACTIVE
Profile 3, Packet Session Status = INACTIVE
Profile 4, Packet Session Status = INACTIVE
Profile 5, Packet Session Status = INACTIVE
Profile 6, Packet Session Status = INACTIVE
Profile 7, Packet Session Status = INACTIVE
Profile 8, Packet Session Status = INACTIVE
Profile 9, Packet Session Status = INACTIVE
Profile 10, Packet Session Status = INACTIVE
Profile 11, Packet Session Status = INACTIVE
Profile 12, Packet Session Status = INACTIVE
Profile 13, Packet Session Status = INACTIVE
Profile 14, Packet Session Status = INACTIVE
Profile 15, Packet Session Status = INACTIVE
Profile 16, Packet Session Status = INACTIVE
Network Information
===================
Current System Time = Mon Oct 28 2:15:50 2019
Current Service Status = Normal
Current Service = Packet switched
Current Roaming Status = Home
Network Selection Mode = Automatic
Network = Telstra
Mobile Country Code (MCC) = 505
Mobile Network Code (MNC) = 1
Packet switch domain(PS) state = Attached
Registration state(EMM) = Registered
EMM Sub State = Normal Service
Tracking Area Code (TAC) = 8407
Cell ID = 133256225
Radio Information
=================
Radio power mode = ON
LTE Rx Channel Number = 3148
LTE Tx Channel Number = 21148
LTE Band = 7
LTE Bandwidth = 20 MHz
Current RSSI = -80 dBm
Current RSRP = -108 dBm
Current RSRQ = -8 dB
Current SNR = 15.0 dB
Radio Access Technology(RAT) Preference = AUTO
Radio Access Technology(RAT) Selected = LTE
Modem Security Information
==========================
Card Holder Verification (CHV1) = Disabled
SIM Status = OK
SIM User Operation Required = None
Number of CHV1 Retries remaining = 3
GPS Information
==========================
GPS Info
-------------
GPS Feature: enabled
GPS Port Selected: Dedicated GPS port
GPS State: GPS disabled
SMS Information
===============
Incoming Message Information
----------------------------
SMS stored in modem = 0
SMS archived since booting up = 0
Total SMS deleted since booting up = 0
Storage records allocated = 25
Storage records used = 0
Number of callbacks triggered by SMS = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Outgoing Message Information
----------------------------
Total SMS sent successfully = 0
Total SMS send failure = 0
Number of outgoing SMS pending = 0
Number of successful archive since booting up = 0
Number of failed archive since booting up = 0
Last Outgoing SMS Status = SUCCESS
Copy-to-SIM Status = 0x0
Send-to-Network Status = 0x0
Report-Outgoing-Message-Number:
Reference Number = 0
Result Code = 0x0
Diag Code = 0x0 0x0 0x0 0x0 0x0
SMS Archive URL =
Error Information
=================
This command is not supported on this platform.
Modem Crashdump Information
===========================
Modem crashdump logging: off
Here is the conf.
line 0/3/0
script dialer lte
modem InOut
no exec
transport input all
transport output all
speed 384000
cellular 0/3/0 lte profile create 1 telstra.extranet
chat-script lte "" "AT!CALL1" TIMEOUT 60 "OK"
password encryption aes
cts logging verbose
controller Cellular 0/3
lte sim data-profile 1 attach-profile 1
lte modem link-recovery rssi onset-threshold -110
lte modem link-recovery monitor-timer 20
lte modem link-recovery wait-timer 10
lte modem link-recovery debounce-count 6
lte event temperature onset mib-trap
lte event temperature abate mib-trap
lte event modem-state mib-trap all
lte event service mib-trap
lte event network mib-trap
lte event connection-status mib-trap All-lte
!
interface Cellular0/3/0
no ip address
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer in-band
dialer pool-member 1
dialer-group 1
no peer default ip address
async mode interactive
routing dynamic
interface Dialer1
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly in
encapsulation slip
dialer pool 1
dialer idle-timeout 0
dialer string lte
dialer persistent
dialer-group 1
no peer neighbor-route
dialer-list 1 protocol ip permit
event manager environment phoneprefix 0
event manager environment _bytes_allowed 1000000000
event manager environment _bytes_warning 75
event manager environment _dom 9
event manager environment whitelist (0434186916|0417253039)
event manager directory user policy flash0:
event manager policy commandoversms.tcl type user
thanks.
