09-14-2018 03:04 PM - edited 03-05-2019 10:55 AM
Hi, I have 2 6506 Core Switches running HSRP (no VSS) and Nexus 5596-UP connected to it at L2. Just like this setup I followed and it works.
https://community.cisco.com/t5/switching/vpc-on-nexus-5000-with-catalyst-6500-no-vss/td-p/1618853
Now we want to move a few congested vlans (vlan701 & 704) from the 6506 to the 5596-UP (add routing and ospf to the Nexus because 6506 can only handle 1G per vlan with the current hardware and the 5596-UP have 10G... and I can only work with the current hardware).
1. OSPF is configured on the 6506-CORE1 and 6506-CORE2 and works. I want to move vlan from core1, add routing and ospf to the Nexus. See the "<<<add" in the config. Does the 5596-UP ospf config look right or do I need to add something to it? Any suggestions on OSPF?
2. How would I configure the the uplink from Nexus 5596-UP to 6506 Core, leave it as a L2 is ok?
----------------------------------------------
6506-CORE1#
----------------------------------------------
router ospf 1
redistribute connected subnets
redistribute static subnets
passive-interface Loopback0
network 10.0.20.177 0.0.0.0 area 0.0.0.0
network 10.0.0.0 0.255.255.255 area 0.0.0.0
default-information originate
----------------------------------------------
N5K-1#
----------------------------------------------
feature ospf
feature pbr
feature interface-vlan
feature hsrp
feature lacp
feature dhcp
feature vpc
feature lldp
feature vtp
interface Vlan550
no shutdown
vrf member VPC-KEEPALIVE
ip address 10.10.50.2/24
!
vpc domain 5
role priority 10
peer-keepalive destination 10.10.50.3 source 10.10.50.2 vrf VPC-KEEPALIVE
delay restore 150
auto-recovery reload-delay 300
!
interface Ethernet1/5
description KEEPALIVE - N5K1 TO N5K2
switchport access vlan 550
!
interface port-channel50
description 5K1 TO 5K2
switchport mode trunk
spanning-tree port type network
vpc peer-link
!
interface Ethernet1/9
description PEER-LINK
switchport mode trunk
channel-group 50 mode active
!
interface Ethernet1/10
description PEER-LINK
switchport mode trunk
channel-group 50 mode active
-------------------------------
interface port-channel61
description TO 6506-CORE1
switchport mode trunk
vpc 61
!
interface port-channel62
description TO 6506-CORE2
switchport mode trunk
vpc 62
!
interface range Ethernet1/1 - 4
description ETHERCHANNEL (4) TO 6506-CORE1
switchport mode trunk
channel-group 61 mode passive
!
interface range Ethernet1/45 - 48
description ETHERCHANNEL (4) TO 6506-CORE2
switchport mode trunk
channel-group 62 mode passive
----------------------------------
interface Vlan701
description SYSTEMS_01
no shutdown
no ip redirects
ip address 10.10.0.2/24 <<<add
ip router ospf 1 area 0.0.0.0 <<<add
hsrp 1 <<<add
preempt
priority 120
ip 10.10.0.1
!
interface Vlan704
description SYSTEMS_03
no shutdown
no ip redirects
ip address 10.10.16.2/24 <<<add
ip router ospf 1 area 0.0.0.0 <<<add
hsrp 1 <<<add
preempt
priority 120
ip 10.10.16.1
!
interface Vlan751
description HW3-CISCO-MGT
no shutdown
no ip redirects
ip address 10.10.7.32/24
!
interface loopback0
ip address 10.0.21.1/28
ip router ospf 1 area 0.0.0.0 <<<add
--------------
ip route 0.0.0.0/0 10.10.0.1
router ospf 1 <<<add
area 0.0.0.0 range 10.10.0.0/22 <<<add
area 0.0.0.0 range 10.10.16.0/24 <<<add
area 0.0.0.0 range 10.0.21.0/28 <<<add
Solved! Go to Solution.
09-18-2018 02:49 PM - edited 09-18-2018 02:56 PM
2018SEP18 - I implemented this over the weekend and it works with the below tweaks!
Lesson Learned / Info:
N5K-1 (config-if)# ip policy route-map TO_LA_ENLAN
% Could not apply PBR route-map - policy action not supported
2018 Aug 16 13:02:15 HW3-N5K1-SW1 %$ VDC-1 %$ %RPM-2-PPF_SES_VERIFY: rpm [4172] PPF session verify failed in client afm(Line card 1/VDC NONE/UUID 656) with an error 0x41ee0013(policy action not supported)
----------------------------------------------------------------------------------------
6506-CORE1# (CORE2 WOULD BE SIMILAR WITH DIFFERENT IP)
----------------------------------------------------------------------------------------
router ospf 1
redistribute connected subnets
redistribute static subnets
passive-interface Loopback0
network 10.0.20.177 0.0.0.0 area 0.0.0.0
!I would do more specific network below, but it is before me, so I am leaving it alone.
network 10.0.0.0 0.255.255.255 area 0.0.0.0
default-information originate
!
interface Vlan552
description CORE-NEXUS-L3
ip address 10.8.52.2 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow monitor NETFLOW_MONITOR input
ip flow monitor NETFLOW_MONITOR output
standby 0 ip 10.8.52.1
standby 0 priority 120
standby 0 preempt
----------------------------------------------
N5K-1#
----------------------------------------------
no feature telnet
cfs eth distribute
feature ospf
feature pbr
feature interface-vlan
feature hsrp
feature lacp
feature dhcp
feature vpc
feature lldp
feature vtp
!PEER-LINK
vrf context VPC-KEEPALIVE
interface Vlan550
description PEER-LINK
no shutdown
vrf member VPC-KEEPALIVE
ip address 10.8.50.2/24
!
vpc domain 5
role priority 10
peer-keepalive destination 10.8.50.3 source 10.8.50.2 vrf VPC-KEEPALIVE
delay restore 150
auto-recovery reload-delay 300
!
interface Ethernet1/5
description KEEPALIVE - N5K1 TO N5K2
switchport access vlan 550
!
interface port-channel50
description 5K1 TO 5K2 PEER-LINK
switchport mode trunk
spanning-tree port type network
vpc peer-link
!
interface Ethernet1/9-10
description PEER-LINK
switchport mode trunk
channel-group 50 mode active
!ETHERCHANNEL TO CORE1 & CORE2
interface port-channel61
description TO 6506-CORE1
switchport mode trunk
vpc 61
!
interface port-channel62
description TO 6506-CORE2
switchport mode trunk
vpc 62
!
interface Ethernet1/1-4
description ETHERCHANNEL (4) TO 6506-CORE1
switchport mode trunk
channel-group 61 mode passive
!
interface Ethernet1/45-48
description ETHERCHANNEL (4) TO 6506-CORE2
switchport mode trunk
channel-group 62 mode passive
--------------------------------------
!TO BLADE SWITCHES - 10G
interface port-channel51
description BLADE-SW1
switchport mode trunk
speed 10000
vpc 51
interface port-channel52
description BLADE-SW2
switchport mode trunk
speed 10000
vpc 52
interface port-channel53
description BLADE-SW3
switchport mode trunk
speed 10000
vpc 53
interface port-channel54
description BLADE-SW4
switchport mode trunk
speed 10000
vpc 54
interface port-channel55
description BLADE-SW5
switchport mode trunk
speed 10000
vpc 55
interface port-channel56
description BLADE-SW6
switchport mode trunk
speed 10000
vpc 56
---
interface Ethernet1/17
description BLADE-SW1
switchport mode trunk
channel-group 51 mode active
interface Ethernet1/19
description BLADE-SW2
switchport mode trunk
channel-group 52 mode active
interface Ethernet1/25
description BLADE-SW3
switchport mode trunk
channel-group 53 mode active
interface Ethernet1/27
description BLADE-SW4
switchport mode trunk
channel-group 54 mode active
interface Ethernet1/33
description BLADE-SW5
switchport mode trunk
channel-group 55 mode active
interface Ethernet1/35
description BLADE-SW6
switchport mode trunk
channel-group 56 mode active
---------------------------------------------
!ROUTING VLANS
interface Vlan701
description SYSTEMS_01
no shutdown
no ip redirects
ip address 10.8.0.2/22
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 120
ip 10.8.0.1
ip dhcp relay address 10.X.X.X
!
!USE FOR DEFAULT GATEWAY
interface Vlan552
description CORE-NEXUS-L3
no shutdown
no ip redirects
ip address 10.8.52.32/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 120
ip 10.8.52.31
!
interface Vlan704
description SYSTEMS_03
no shutdown
no ip redirects
ip address 10.8.16.2/24
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 120
ip 10.8.16.1
ip dhcp relay address 10.X.X.X
!
interface Vlan751
description CISCO-MGT
no shutdown
no ip redirects
ip address 10.8.7.32/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 120
ip 10.8.7.31
!
interface loopback0
ip address 10.0.21.1/28
ip router ospf 1 area 0.0.0.0
--------------
!ROUTING & OSPF
ip route 0.0.0.0/0 10.8.52.1
router ospf 1
area 0.0.0.0 range 10.0.21.0/28
area 0.0.0.0 range 10.8.0.0/22
area 0.0.0.0 range 10.8.7.0/24
area 0.0.0.0 range 10.8.16.0/24
area 0.0.0.0 range 10.8.52.0/24
----------------------
!access-list 1 to allow only certain network to ssh
ip access-list 1
10 remark : REMOTE ACCESS TO SWITCH FROM THESE IP
20 permit ip 10.8.0.0/32 any
line console
exec-timeout 15
line vty
exec-timeout 15
access-class 1 in
!SNMP (NOTE IT USES ACL 1 ALSO)
snmp-server contact NETWORK SUPPORT 123.456.789
snmp-server location 11 CISCO DR, SAN JOSE, CA 77077
snmp-server host 10.8.18.100 traps version 2c <KEY>
snmp-server host 10.8.18.100 source-interface Vlan751
!
!network-operator is for RO, network-admin is for RW
snmp-server community <RO> group network-operator
snmp-server community <RW STRING> group network-admin
snmp-server community <RW STRING> use-ipv4acl 1
!AUTHENTICATION & RADIUS
username NWADMIN password <XXXXX> role network-admin
aaa authentication login default group radius local
aaa accounting default group radius
radius-server host 10.X.X.X key XXXXX auth-port 1645 acct-port 1646 authentication accounting
ssh login-attempts 2
ssh key rsa 2048
login block-for 1800 attempts 5 within 90
login quiet-mode access-class 1
!ROUTE-MAP
ip access-list 150
10 remark : ROUTE TO LA ENLAN
20 remark : PBR DOESN.T SUPPPORT DENY . PERMIT BELOW EXCEPT TO 10.8.1.24
30 permit ip 10.8.0.0/22 10.1.1.0/28
40 permit ip 10.8.0.0/22 10.1.1.16/29
50 permit ip 10.8.0.0/22 10.1.1.25/32
60 permit ip 10.8.0.0/22 10.1.1.26/31
70 permit ip 10.8.0.0/22 10.1.1.28/30
80 permit ip 10.8.0.0/22 10.1.1.32/27
90 permit ip 10.8.0.0/22 10.1.1.64/26
100 permit ip 10.8.0.0/22 10.1.1.128/25
!
route-map TO_LA_ENLAN permit 10
match ip address 150
set ip next-hop 172.16.2.2
!
interface x
ip policy route-map TO_LA_ENLAN
!MGT (OPTIONAL)
vrf context management
ip route 0.0.0.0/0 10.8.7.1
interface mgmt0
vrf member management
ip address 10.X.X.X/24
!OTHER COMMANDS
no ip domain-lookup
ip domain-name XXXXX.com
ip name-server 10.XXXX
no ip source-route
no ip igmp snooping mrouter vpc-peer-link
clock timezone CST -6 0
clock summer-time CDT 1 Sun Apr 02:00 4 sun oct 02:00 60
cli alias name wrme copy run start
ntp server 10.X.X.X
boot kickstart bootflash:/n5000-uk9-kickstart.7.3.3.N1.1.bin
boot system bootflash:/n5000-uk9.7.3.3.N1.1.bin
logging server 10.X.X.X
----------------------------------------------
N5K-2#
----------------------------------------------
!PEER-LINK
vrf context VPC-KEEPALIVE
!
vpc domain 5
role priority 20
peer-keepalive destination 10.8.50.2 source 10.8.50.3 vrf VPC-KEEPALIVE
delay restore 150
auto-recovery reload-delay 300
!
interface Vlan550
description PEER-LINK
no shutdown
vrf member VPC-KEEPALIVE
ip address 10.8.50.3/24
!
interface Ethernet1/5
description KEEPALIVE - N5K2 TO N5K1
switchport access vlan 550
!
interface port-channel50
description 5K1 TO 5K2 PEER-LINK
switchport mode trunk
spanning-tree port type network
speed 10000
duplex full
vpc peer-link
!
interface Ethernet1/9-10
description PEER-LINK
switchport mode trunk
duplex full
channel-group 50 mode passive
!ETHERCHANNEL TO CORE1 & CORE2
interface port-channel61
description TO 6506-CORE1
switchport mode trunk
vpc 61
!
interface port-channel62
description TO 6506-CORE2
switchport mode trunk
vpc 62
!
interface Ethernet1/1-4
description ETHERCHANNEL (4) TO 6506-CORE1
switchport mode trunk
channel-group 61 mode passive
!
interface Ethernet1/45-48
description ETHERCHANNEL (4) TO 6506-CORE2
switchport mode trunk
channel-group 62 mode passive
--------------------------------------
!TO BLADE SWITCHES - 10G
interface port-channel51
description BLADE-SW1
switchport mode trunk
speed 10000
vpc 51
interface port-channel52
description BLADE-SW2
switchport mode trunk
speed 10000
vpc 52
interface port-channel53
description BLADE-SW3
switchport mode trunk
speed 10000
vpc 53
interface port-channel54
description BLADE-SW4
switchport mode trunk
speed 10000
vpc 54
interface port-channel55
description BLADE-SW5
switchport mode trunk
speed 10000
vpc 55
interface port-channel56
description BLADE-SW6
switchport mode trunk
speed 10000
vpc 56
---
interface Ethernet1/17
description BLADE-SW1
switchport mode trunk
channel-group 51 mode active
interface Ethernet1/19
description BLADE-SW2
switchport mode trunk
channel-group 52 mode active
interface Ethernet1/25
description BLADE-SW3
switchport mode trunk
channel-group 53 mode active
interface Ethernet1/27
description BLADE-SW4
switchport mode trunk
channel-group 54 mode active
interface Ethernet1/33
description BLADE-SW5
switchport mode trunk
channel-group 55 mode active
interface Ethernet1/35
description BLADE-SW6
switchport mode trunk
channel-group 56 mode active
!ROUTING VLANS
interface Vlan701
description SYSTEMS_01
no shutdown
no ip redirects
ip address 10.8.0.23/22
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 110
ip 10.8.0.1
ip dhcp relay address 10.X.X.X
interface Vlan550
description PEER-LINK
no shutdown
vrf member VPC-KEEPALIVE
ip address 10.8.50.3/24
interface Vlan552
description CORE-NEXUS-L3
no shutdown
no ip redirects
ip address 10.8.52.33/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 110
ip 10.8.52.31
interface Vlan704
description SYSTEMS_03
no shutdown
no ip redirects
ip address 10.8.16.3/24
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 110
ip 10.8.16.1
ip dhcp relay address 10.X.X.X
interface Vlan751
description CISCO-MGT
no shutdown
no ip redirects
ip address 10.8.7.33/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 110
ip 10.8.7.31
!ROUTING & OSPF
ip route 0.0.0.0/0 10.8.52.1
router ospf 1
area 0.0.0.0 range 10.0.21.16/28
area 0.0.0.0 range 10.8.0.0/22
area 0.0.0.0 range 10.8.7.0/24
area 0.0.0.0 range 10.8.16.0/24
area 0.0.0.0 range 10.8.52.0/24
09-17-2018 02:55 PM
09-18-2018 02:45 PM
09-18-2018 02:49 PM - edited 09-18-2018 02:56 PM
2018SEP18 - I implemented this over the weekend and it works with the below tweaks!
Lesson Learned / Info:
N5K-1 (config-if)# ip policy route-map TO_LA_ENLAN
% Could not apply PBR route-map - policy action not supported
2018 Aug 16 13:02:15 HW3-N5K1-SW1 %$ VDC-1 %$ %RPM-2-PPF_SES_VERIFY: rpm [4172] PPF session verify failed in client afm(Line card 1/VDC NONE/UUID 656) with an error 0x41ee0013(policy action not supported)
----------------------------------------------------------------------------------------
6506-CORE1# (CORE2 WOULD BE SIMILAR WITH DIFFERENT IP)
----------------------------------------------------------------------------------------
router ospf 1
redistribute connected subnets
redistribute static subnets
passive-interface Loopback0
network 10.0.20.177 0.0.0.0 area 0.0.0.0
!I would do more specific network below, but it is before me, so I am leaving it alone.
network 10.0.0.0 0.255.255.255 area 0.0.0.0
default-information originate
!
interface Vlan552
description CORE-NEXUS-L3
ip address 10.8.52.2 255.255.255.0
no ip redirects
no ip unreachables
no ip proxy-arp
ip flow monitor NETFLOW_MONITOR input
ip flow monitor NETFLOW_MONITOR output
standby 0 ip 10.8.52.1
standby 0 priority 120
standby 0 preempt
----------------------------------------------
N5K-1#
----------------------------------------------
no feature telnet
cfs eth distribute
feature ospf
feature pbr
feature interface-vlan
feature hsrp
feature lacp
feature dhcp
feature vpc
feature lldp
feature vtp
!PEER-LINK
vrf context VPC-KEEPALIVE
interface Vlan550
description PEER-LINK
no shutdown
vrf member VPC-KEEPALIVE
ip address 10.8.50.2/24
!
vpc domain 5
role priority 10
peer-keepalive destination 10.8.50.3 source 10.8.50.2 vrf VPC-KEEPALIVE
delay restore 150
auto-recovery reload-delay 300
!
interface Ethernet1/5
description KEEPALIVE - N5K1 TO N5K2
switchport access vlan 550
!
interface port-channel50
description 5K1 TO 5K2 PEER-LINK
switchport mode trunk
spanning-tree port type network
vpc peer-link
!
interface Ethernet1/9-10
description PEER-LINK
switchport mode trunk
channel-group 50 mode active
!ETHERCHANNEL TO CORE1 & CORE2
interface port-channel61
description TO 6506-CORE1
switchport mode trunk
vpc 61
!
interface port-channel62
description TO 6506-CORE2
switchport mode trunk
vpc 62
!
interface Ethernet1/1-4
description ETHERCHANNEL (4) TO 6506-CORE1
switchport mode trunk
channel-group 61 mode passive
!
interface Ethernet1/45-48
description ETHERCHANNEL (4) TO 6506-CORE2
switchport mode trunk
channel-group 62 mode passive
--------------------------------------
!TO BLADE SWITCHES - 10G
interface port-channel51
description BLADE-SW1
switchport mode trunk
speed 10000
vpc 51
interface port-channel52
description BLADE-SW2
switchport mode trunk
speed 10000
vpc 52
interface port-channel53
description BLADE-SW3
switchport mode trunk
speed 10000
vpc 53
interface port-channel54
description BLADE-SW4
switchport mode trunk
speed 10000
vpc 54
interface port-channel55
description BLADE-SW5
switchport mode trunk
speed 10000
vpc 55
interface port-channel56
description BLADE-SW6
switchport mode trunk
speed 10000
vpc 56
---
interface Ethernet1/17
description BLADE-SW1
switchport mode trunk
channel-group 51 mode active
interface Ethernet1/19
description BLADE-SW2
switchport mode trunk
channel-group 52 mode active
interface Ethernet1/25
description BLADE-SW3
switchport mode trunk
channel-group 53 mode active
interface Ethernet1/27
description BLADE-SW4
switchport mode trunk
channel-group 54 mode active
interface Ethernet1/33
description BLADE-SW5
switchport mode trunk
channel-group 55 mode active
interface Ethernet1/35
description BLADE-SW6
switchport mode trunk
channel-group 56 mode active
---------------------------------------------
!ROUTING VLANS
interface Vlan701
description SYSTEMS_01
no shutdown
no ip redirects
ip address 10.8.0.2/22
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 120
ip 10.8.0.1
ip dhcp relay address 10.X.X.X
!
!USE FOR DEFAULT GATEWAY
interface Vlan552
description CORE-NEXUS-L3
no shutdown
no ip redirects
ip address 10.8.52.32/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 120
ip 10.8.52.31
!
interface Vlan704
description SYSTEMS_03
no shutdown
no ip redirects
ip address 10.8.16.2/24
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 120
ip 10.8.16.1
ip dhcp relay address 10.X.X.X
!
interface Vlan751
description CISCO-MGT
no shutdown
no ip redirects
ip address 10.8.7.32/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 120
ip 10.8.7.31
!
interface loopback0
ip address 10.0.21.1/28
ip router ospf 1 area 0.0.0.0
--------------
!ROUTING & OSPF
ip route 0.0.0.0/0 10.8.52.1
router ospf 1
area 0.0.0.0 range 10.0.21.0/28
area 0.0.0.0 range 10.8.0.0/22
area 0.0.0.0 range 10.8.7.0/24
area 0.0.0.0 range 10.8.16.0/24
area 0.0.0.0 range 10.8.52.0/24
----------------------
!access-list 1 to allow only certain network to ssh
ip access-list 1
10 remark : REMOTE ACCESS TO SWITCH FROM THESE IP
20 permit ip 10.8.0.0/32 any
line console
exec-timeout 15
line vty
exec-timeout 15
access-class 1 in
!SNMP (NOTE IT USES ACL 1 ALSO)
snmp-server contact NETWORK SUPPORT 123.456.789
snmp-server location 11 CISCO DR, SAN JOSE, CA 77077
snmp-server host 10.8.18.100 traps version 2c <KEY>
snmp-server host 10.8.18.100 source-interface Vlan751
!
!network-operator is for RO, network-admin is for RW
snmp-server community <RO> group network-operator
snmp-server community <RW STRING> group network-admin
snmp-server community <RW STRING> use-ipv4acl 1
!AUTHENTICATION & RADIUS
username NWADMIN password <XXXXX> role network-admin
aaa authentication login default group radius local
aaa accounting default group radius
radius-server host 10.X.X.X key XXXXX auth-port 1645 acct-port 1646 authentication accounting
ssh login-attempts 2
ssh key rsa 2048
login block-for 1800 attempts 5 within 90
login quiet-mode access-class 1
!ROUTE-MAP
ip access-list 150
10 remark : ROUTE TO LA ENLAN
20 remark : PBR DOESN.T SUPPPORT DENY . PERMIT BELOW EXCEPT TO 10.8.1.24
30 permit ip 10.8.0.0/22 10.1.1.0/28
40 permit ip 10.8.0.0/22 10.1.1.16/29
50 permit ip 10.8.0.0/22 10.1.1.25/32
60 permit ip 10.8.0.0/22 10.1.1.26/31
70 permit ip 10.8.0.0/22 10.1.1.28/30
80 permit ip 10.8.0.0/22 10.1.1.32/27
90 permit ip 10.8.0.0/22 10.1.1.64/26
100 permit ip 10.8.0.0/22 10.1.1.128/25
!
route-map TO_LA_ENLAN permit 10
match ip address 150
set ip next-hop 172.16.2.2
!
interface x
ip policy route-map TO_LA_ENLAN
!MGT (OPTIONAL)
vrf context management
ip route 0.0.0.0/0 10.8.7.1
interface mgmt0
vrf member management
ip address 10.X.X.X/24
!OTHER COMMANDS
no ip domain-lookup
ip domain-name XXXXX.com
ip name-server 10.XXXX
no ip source-route
no ip igmp snooping mrouter vpc-peer-link
clock timezone CST -6 0
clock summer-time CDT 1 Sun Apr 02:00 4 sun oct 02:00 60
cli alias name wrme copy run start
ntp server 10.X.X.X
boot kickstart bootflash:/n5000-uk9-kickstart.7.3.3.N1.1.bin
boot system bootflash:/n5000-uk9.7.3.3.N1.1.bin
logging server 10.X.X.X
----------------------------------------------
N5K-2#
----------------------------------------------
!PEER-LINK
vrf context VPC-KEEPALIVE
!
vpc domain 5
role priority 20
peer-keepalive destination 10.8.50.2 source 10.8.50.3 vrf VPC-KEEPALIVE
delay restore 150
auto-recovery reload-delay 300
!
interface Vlan550
description PEER-LINK
no shutdown
vrf member VPC-KEEPALIVE
ip address 10.8.50.3/24
!
interface Ethernet1/5
description KEEPALIVE - N5K2 TO N5K1
switchport access vlan 550
!
interface port-channel50
description 5K1 TO 5K2 PEER-LINK
switchport mode trunk
spanning-tree port type network
speed 10000
duplex full
vpc peer-link
!
interface Ethernet1/9-10
description PEER-LINK
switchport mode trunk
duplex full
channel-group 50 mode passive
!ETHERCHANNEL TO CORE1 & CORE2
interface port-channel61
description TO 6506-CORE1
switchport mode trunk
vpc 61
!
interface port-channel62
description TO 6506-CORE2
switchport mode trunk
vpc 62
!
interface Ethernet1/1-4
description ETHERCHANNEL (4) TO 6506-CORE1
switchport mode trunk
channel-group 61 mode passive
!
interface Ethernet1/45-48
description ETHERCHANNEL (4) TO 6506-CORE2
switchport mode trunk
channel-group 62 mode passive
--------------------------------------
!TO BLADE SWITCHES - 10G
interface port-channel51
description BLADE-SW1
switchport mode trunk
speed 10000
vpc 51
interface port-channel52
description BLADE-SW2
switchport mode trunk
speed 10000
vpc 52
interface port-channel53
description BLADE-SW3
switchport mode trunk
speed 10000
vpc 53
interface port-channel54
description BLADE-SW4
switchport mode trunk
speed 10000
vpc 54
interface port-channel55
description BLADE-SW5
switchport mode trunk
speed 10000
vpc 55
interface port-channel56
description BLADE-SW6
switchport mode trunk
speed 10000
vpc 56
---
interface Ethernet1/17
description BLADE-SW1
switchport mode trunk
channel-group 51 mode active
interface Ethernet1/19
description BLADE-SW2
switchport mode trunk
channel-group 52 mode active
interface Ethernet1/25
description BLADE-SW3
switchport mode trunk
channel-group 53 mode active
interface Ethernet1/27
description BLADE-SW4
switchport mode trunk
channel-group 54 mode active
interface Ethernet1/33
description BLADE-SW5
switchport mode trunk
channel-group 55 mode active
interface Ethernet1/35
description BLADE-SW6
switchport mode trunk
channel-group 56 mode active
!ROUTING VLANS
interface Vlan701
description SYSTEMS_01
no shutdown
no ip redirects
ip address 10.8.0.23/22
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 110
ip 10.8.0.1
ip dhcp relay address 10.X.X.X
interface Vlan550
description PEER-LINK
no shutdown
vrf member VPC-KEEPALIVE
ip address 10.8.50.3/24
interface Vlan552
description CORE-NEXUS-L3
no shutdown
no ip redirects
ip address 10.8.52.33/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 110
ip 10.8.52.31
interface Vlan704
description SYSTEMS_03
no shutdown
no ip redirects
ip address 10.8.16.3/24
ip router ospf 1 area 0.0.0.0
ip policy route-map TO_LA_ENLAN
hsrp 1
preempt
priority 110
ip 10.8.16.1
ip dhcp relay address 10.X.X.X
interface Vlan751
description CISCO-MGT
no shutdown
no ip redirects
ip address 10.8.7.33/24
ip router ospf 1 area 0.0.0.0
hsrp 1
preempt
priority 110
ip 10.8.7.31
!ROUTING & OSPF
ip route 0.0.0.0/0 10.8.52.1
router ospf 1
area 0.0.0.0 range 10.0.21.16/28
area 0.0.0.0 range 10.8.0.0/22
area 0.0.0.0 range 10.8.7.0/24
area 0.0.0.0 range 10.8.16.0/24
area 0.0.0.0 range 10.8.52.0/24
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide