cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
632
Views
0
Helpful
2
Replies

7606-s 10 Giga interfaces

mohameddz
Level 1
Level 1

Hello every one;

 

at my company we have a 7606-s router and we want to get a card with some 10Giga port using SFP+

can any one help choosing please ?

 

 

 

 

RTR#sh module
Mod Ports Card Type Model Serial No.
--- ----- -------------------------------------- ------------------ -----------
1 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAB103400Y1
2 0 4-subslot SPA Interface Processor-400 7600-SIP-400 JAB1034046Z
3 24 CEF720 24 port 1000mb SFP WS-X6724-SFP SAL09148EJ4
4 20 7600 ES+ 7600-ES+20G3CXL JAE1340KH0U
5 2 Route Switch Processor 720 (Active) RSP720-3CXL-GE JAE1405388I
6 2 Route Switch Processor 720 (Hot) RSP720-3CXL-GE SAL16052QWF

 

 

 

RTR#sh version
Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.5(3)S5, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2017 by Cisco Systems, Inc.
Compiled Wed 18-Jan-17 06:12 by prod_rel_team

ROM: System Bootstrap, Version 12.2(33r)SRD5, RELEASE SOFTWARE (fc1)
BOOTLDR: Cisco IOS Software, c7600rsp72043_rp Software (c7600rsp72043_rp-ADVENTERPRISEK9-M), Version 15.5(3)S5, RELEASE SOFTWARE (fc1)

core1-ca1.alg.icosnet.net uptime is 11 weeks, 4 days, 1 hour, 47 minutes
Uptime for this control processor is 11 weeks, 4 days, 1 hour, 40 minutes
System returned to ROM by reload (SP by reload)
System restarted at 14:47:50 ALG Wed Nov 22 2017
System image file is "sup-bootdisk:c7600rsp72043-adventerprisek9-mz.155-3.S5.bin"
Last reload type: Normal Reload
Last reload reason: Reload Command

 

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco CISCO7606-S (M8500) processor (revision 2.0) with 3670016K/262144K bytes of memory.
Processor board ID FXS1802Q07A
BASEBOARD: RSP720
CPU: MPC8548_E, Version: 2.0, (0x80390020)
CORE: E500, Version: 2.0, (0x80210020)
CPU:1200MHz, CCB:400MHz, DDR:200MHz,
L1: D-cache 32 kB enabled
I-cache 32 kB enabled

Last reset from power-on
2 SIP-400 controllers (13 POS)(1 Channelized OC12/STM-4).
1 Virtual Ethernet interface
48 Gigabit Ethernet interfaces
13 Packet over SONET interfaces
1 Channelized OC12 interface
3964K bytes of non-volatile configuration memory.

507024K bytes of Internal ATA PCMCIA card (Sector size 512 bytes).
Configuration register is 0x2102

2 Replies 2

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

There is (WS-X6704-10GE). This module supports XenPac optics which is SC-type connector and not LC. 

So, it does not support SFP+.

see figure-2-31 in this link

https://www.cisco.com/c/en/us/td/docs/routers/7600/Hardware/Hardware_Guides/7600_Series_Router_Module_Guide/modguid/02ethern.html#wp1042590

HTH

thanks reza

 

the "WS-X6704-10GE" seem to be an old card, we are lookin for somthing recent and supporting SFP+ modules.

is ther any other card with 10 Giga port for 7606-s ?

 

thanks.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco