cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
137
Views
0
Helpful
2
Replies
Highlighted
Beginner

887 series router eem question

Hi everyone,

 

there is a eem configuration which is using in my new job. I try to slove what does it do but i am confused. could anyone please light me about the configuration below. i don't understand the condition of the conf. because of that i only add just condition side.

 

event manager applet SIM_Slot_Switch authorization bypass

 event tag one track 3 state down maxrun 2000

 event tag two track 3 state up

 trigger occurs 5 period 600

  correlate event one or event two

  attribute tag one occurs 1

  attribute tag two occurs 1

2 REPLIES 2
VIP Mentor

Re: 887 series router eem question

Hello,

 

post the full configuration of the router...

Beginner

Re: 887 series router eem question

Here it is;

 

track 1 ip sla 1 reachability
!
track 3 list boolean or
object 4
object 5
!
track 4 ip sla 4 reachability
!
track 5 ip sla 5 reachability

----

ip sla auto discovery
ip sla 1
icmp-echo 10.z.z.z source-interface BVI1
ip sla schedule 1 life forever start-time now
ip sla 4
icmp-echo 10.x.x.x source-interface Cellular0
ip sla schedule 4 life forever start-time now
ip sla 5
icmp-echo 10.y.y.y source-interface Cellular0
ip sla schedule 5 life forever start-time now

-----

event manager applet SIM_Slot_Switch authorization bypass
event tag one track 3 state down maxrun 2000
event tag two track 3 state up
trigger occurs 5 period 600
correlate event one or event two
attribute tag one occurs 1
attribute tag two occurs 1
action 01 cli command "en"
action 02 while 1 eq 1
action 03 cli command "show cell 0 all | inc Active SIM"
action 04 regexp "Active SIM = ([0-9])" "$_cli_result" match slot
action 05 if $slot eq "0"
action 06 cli command "cellular 0 gsm sim activate slot 1"
action 07 cli command "cellular 0 lte sim activate slot 1"
action 08 else
action 09 cli command "cellular 0 gsm sim activate slot 0"
action 10 cli command "cellular 0 lte sim activate slot 0"
action 11 end
action 12 syslog msg "SIM_SLOT_SWITCHED"
action 13 wait 450
action 14 cli command "show track 3 | i B"
action 15 regexp "Boolean OR is ([A-Za-z]+)" "$_cli_result" match state
action 16 if $state eq "Up"
action 17 syslog msg "SIM_Success"
action 18 break
action 19 else
action 20 syslog msg "SIM_Fail"
action 21 end
action 22 end

CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards