Hi,I have a question about Quad-Sup VSS.My software ver is 12.2(50)SY and I have 4 Supervisor Engine 2T.
Can sup 2T support quad-sup Vss?
thank you~
Solved! Go to Solution.
Hi Mu,
VSS will work just fine, but quad sup is not supported on Superviser Engine 2T.
Cisco Supervisor Engine 2T with quad-supervisor uplink forwarding will not be supported at FCS. This function will be added at a future date.
Please mark answered.
Regards
Please rate if it helps.
Hi Mu,
VSS will work just fine, but quad sup is not supported on Superviser Engine 2T.
Cisco Supervisor Engine 2T with quad-supervisor uplink forwarding will not be supported at FCS. This function will be added at a future date.
Please mark answered.
Regards
Please rate if it helps.
hi,
Thank you for your answer.
Dose quad-supervisor uplink forwarding equal vss quad-sup system?
thank you very much~
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_bulletin_c25_603217.html
Please check this ..for your answer.
Regards
Please rate if it helps.
Thank you for you help~
This is available now, starting from IOS release 15.1(1)SY1.
http://www.cisco.com/en/US/products/hw/switches/ps708/index.html
See "New software capabilities".