07-06-2012 01:59 AM - edited 03-04-2019 04:53 PM
Hi,I have a question about Quad-Sup VSS.My software ver is 12.2(50)SY and I have 4 Supervisor Engine 2T.
Can sup 2T support quad-sup Vss?
thank you~
Solved! Go to Solution.
07-06-2012 04:26 AM
Hi Mu,
VSS will work just fine, but quad sup is not supported on Superviser Engine 2T.
Cisco Supervisor Engine 2T with quad-supervisor uplink forwarding will not be supported at FCS. This function will be added at a future date.
Please mark answered.
Regards
Please rate if it helps.
07-06-2012 04:26 AM
Hi Mu,
VSS will work just fine, but quad sup is not supported on Superviser Engine 2T.
Cisco Supervisor Engine 2T with quad-supervisor uplink forwarding will not be supported at FCS. This function will be added at a future date.
Please mark answered.
Regards
Please rate if it helps.
07-08-2012 11:19 PM
hi,
Thank you for your answer.
Dose quad-supervisor uplink forwarding equal vss quad-sup system?
thank you very much~
07-09-2012 12:13 AM
http://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps708/product_bulletin_c25_603217.html
Please check this ..for your answer.
Regards
Please rate if it helps.
07-09-2012 12:31 AM
Thank you for you help~
08-21-2013 09:03 AM
This is available now, starting from IOS release 15.1(1)SY1.
http://www.cisco.com/en/US/products/hw/switches/ps708/index.html
See "New software capabilities".
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: