Active/Active, multi homed BGP, dual router , HSRP config
Active/Active, multi homed BGP, dual router , HSRP config on LAN, Now I want to change the HSRP priority to avoid one extra hop in case one ISP fails, I want to use the EEM feature instead of IP SLA which I am currently using But It’s the first time I am trying to use this,
Can you guys help me to find whether my EEM config is good enough to achieve what I am trying to achieve or I need to make some changes to this config
event manager applet track-bgp-down
event syslog pattern "%BGP-5-ADJCHANGE: neighbor 10.10.10.17 Down BGP Notification sent"
action 1.0 syslog priority critical msg "EBGP Session to peer is down"
Hello I am getting this following error and get ACTV, XPS and S-PWR LEDs amber then suddenly all LEDs are off: Booting...(use DDR clock 667 MHz)*** Coprocessor Unusable Exception ***PC = 0x00000000 00000000SP = 0x00000000 00000000Cause Reg...
Once Cisco DNA Center has provisioned the SD-Access devices to sites, the SD-Access fabric can be created. In the Cisco DNA Center UI, navigate to Provision > Fabric. This is where you create and manage your fabric domains and transits.]
Provision Discovered Devices
On the Cisco DNA Center UI, navigate to Provision page
Select the following devices and provision all the devices to Floor-1. During the provision workflow, Cisco DNA Center can only provision devices of similar family. We wi...