Hi all,
can anyone provide me with an ATM-config for the australian provider AAPT?
I have an 887VA (IOS 15.2) on the following connection (ADSL2+):
Service Type: IP-Line Link
Service Speed (Mbps): Up to 20Mbps/1Mbps
...
Encapsulation: PPPoA/VCMUX or PPPoE/LLC
I never provisioned an 887VA and also not for that provider. Anything I have to be aware of?
Other routers for that client are 877 configured for Telarus-DSL which use DSL- commands under the main-interface and also with subinterfaces:
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
dsl enable-training-log
!
interface ATM0.1 point-to-point
pvc 8/35
vbr-nrt 256 256
pppoe-client dial-pool-number 1
But it seems that this is not the way to configure the 887 ...
regards, Karsten
--
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni