cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2359
Views
0
Helpful
1
Replies

ADSL configuration for cisco 2811 ADSL router

arumugasamy
Level 1
Level 1

Dear Netpros,

Find below the configuration script for the adsl HUAWEI router got from local isp.

#

sysname 17580482

#

cpu-usage cycle 1min

#

DNS resolve

DNS server 117.17.233.49

DNS server117.16.233.101

DNS server 183.184.97.197

DNS server 183.186.97.202

#

web set-package force flash:/http.zip

#

radius scheme system

#

domain system

#

interface Aux0

async mode flow

shutdown

#

interface Ethernet0/0

ip address 70.x.x.54 255.255.255.248

#

interface Serial0/0

clock DTECLK1

link-protocol ppp

shutdown

ip address dhcp-alloc

#

interface Atm1/0

loadbandwidth 2048

interface Atm1/0.1

pvc 8/35

map bridge Virtual-Ethernet1

#

interface Atm1/0.2

pvc 7/35

map bridge Virtual-Ethernet2

#

interface Virtual-Ethernet1

description INET-SERVICE

ip address 70.x.x.21 255.255.255.252

#

#

interface NULL0

#

FTP server enable

#

ip route-static 0.0.0.0 0.0.0.0 70.69.105.22 preference 60

#

snmp-agent local-engineid 000007DB7F0000010000233D

snmp-agent community read cisco

snmp-agent community write cisco

snmp-agent sys-info version all

snmp-agent target-host trap address udp-domain 102.3.6.104 params securityname cisco v3

snmp-agent trap source Virtual-Ethernet2

#

user-interface con 0

authentication-mode scheme

user-interface aux 0

user-interface vty 0 4

authentication-mode scheme

Brief:

I tried to configure the cisco router 2811 replacing the HUAWEI router with the below config details i usally do for the adsl connection using SDM GUI.The PVC 8/35 and encap pppoAMUX and username and password.

But the result is atm up but the virtual-access 2 is down. LCP ReQ some message appear.

Finally the ISP informed us that they setup would not support Cisco routers and adviced the customer go for fixed ip adsl service that support the config i used (PVC,PPPOAMUX). ISP gave the customer managed adsl service that not work with cisco router. I do not believe it and i believe i forget the cmds to configure.

So i came to the Form for your help.

Please advice me how can i configure the router with the above HUAWEI.

Customer adviced by ISP for the leased line service with fixed IP ADDRESSES.

Thanks

swami

1 Reply 1

please show us the actual config from the 2811. thx.

Review Cisco Networking for a $25 gift card