cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
902
Views
0
Helpful
2
Replies

AIM-VPN/SSL-3 Module not detected

ronald.ramzy
Level 1
Level 1

Hi,

I have Cisco 3845 Router, installed AIM-VPN/SSL-3 module on slot 1 but doesnt detects the card.

We have IOS (C3845-ADVSECURITYK9-M), Version 12.4(3d)

sh crypto engine brief

crypto engine name: Virtual Private Network (VPN) Module

crypto engine type: hardware

State: Enabled

Location: onboard 0

Product Name: Onboard-VPN

FW Version: 01100200

Time running: 209 seconds

Compression: Yes

DES: Yes

3 DES: Yes

AES CBC: Yes (128,192,256)

AES CNTR: No

Maximum buffer length: 4096

Maximum DH index: 0700

Maximum SA index: 0700

Maximum Flow index: 1400

Maximum RSA key size: 2048

crypto engine name: Cisco VPN Software Implementation

crypto engine type: software

serial number: C112234

crypto engine state: installed

crypto engine in slot: N/A

Any Help

2 Replies 2

Jon Marshall
Hall of Fame
Hall of Fame

Ronald

You need to upgrade your IOS to the T train, specifically you need a minimum of 12.4(9)T. See this link for more details -

http://www.cisco.com/en/US/docs/ios/12_4t/12_4t11/htvpnssl.html#wp1066359

Jon

You are right, I needed IOS upgrade.

Using the Configurator Tool the Router 3845 shows AIM-VPN/SSL-3 but in reality its a built in on board not external AIM-VPN/SSL-3 module.

what is the difference between build in and external.

Review Cisco Networking for a $25 gift card