BGP router identifier 188.8.131.52, local AS number 65501
Non-stop routing is enabled
BGP table state: Active
Table ID: 0xe0000011 RD version: 91134
BGP main routing table version 91134
BGP NSR Initial initsync version 4294967295 (Not Reached)
Status codes: s suppressed, d damped, h history, * valid, > best
i - internal, r RIB-failure, S stale, N Nexthop-discard
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
Route Distinguisher: 1:100 (default for vrf 100)
*>i184.108.40.206/24 220.127.116.11 0 100 0 65100 ?
Here is where it gets sticky, and I believe I'm missing some rule set of MP-BGP. Unless we set as-override at PE2, PE2 will never send an update to CE2. My belief in the scenerio was that PE2 would sent the advertisement but CE2 should dampen it unless it unless we set it to allow our own AS in , allow-as in.